3M 3M Digital Projector X30N/X35N, Item, Description, Setup, Ip Address, Subnet, Mask, Default

3M™ Digital Projector X30N/X35N

NETWORK menu

Item

Description

SETUP

(continued)

	Use the ▲/▼/◄/► buttons to enter the IP
	ADDRESS.
	This function can only be used when DHCP is set
IP ADDRESS	to OFF.
	• The IP ADDRESS is the number that identifies
	this projector on the network. You cannot have two
	devices with the same IP ADDRESS on the same
	network.
	• The IP ADDRESS “0.0.0.0” is prohibited.
	Use the ▲/▼/◄/► buttons to enter the same
SUBNET	SUBNET MASK used by your computer.
	This function can only be used when DHCP is set
MASK	to OFF.
	• The SUBNET MASK ”0.0.0.0” is prohibited.
	Use the ▲/▼/◄/► buttons to enter the DEFAULT
DEFAULT	GATEWAY (a node on a computer network that
	serves as an access point to another network)
GATEWAY	address.
	This function can only be used when DHCP is set
	to OFF.
	Use the ▲/▼/◄/► buttons to input the DNS
DNS SERVER	server address.
	The DNS server is a system to control domain
	names and IP addresses on the Network.
	Use the ▲/▼ buttons to enter the TIME
	DIFFERENCE.
TIME	Set the same TIME DIFFERENCE as the one
	set on your computer. If unsure, consult your IT
DIFFERENCE
	manager.
	Use the ► button to return to the menu after
	setting the TIME DIFFERENCE.
	Use the ▲/▼/◄/► buttons to enter the Year (last
DATE AND	two digits), Month, Date, Hour and Minute.
	• The projector will override this setting and retrieve
TIME	DATE AND TIME information from the Time server
	when SNTP is enabled. ( Date/Time Settings
	of the Network Guide)

(continued on next page)

52 © 3M 2009. All Rights Reserved.