3M warranty PICTUREmenu, 3M Digital Projector X30N/X35N

3M™ Digital Projector X30N/X35N

PICTURE menu

PICTURE menu

From the PICTURE menu, items shown in the table below can be performed.

Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.

Item			Description
BRIGHTNESS	Using the ◄/► buttons adjusts the brightness.
		Dark ó Light
CONTRAST		Using the ◄/► buttons adjusts the contrast.
		Weak ó Strong
		Using the ▲/▼ buttons switches the gamma mode.
		1 DEFAULT  1 CUSTOM  2 DEFAULT  2 CUSTOM  3 DEFAULT
					
		6 CUSTOM			3 CUSTOM
					
		6 DEFAULT  5 CUSTOM  5 DEFAULT 		4 CUSTOM  4 DEFAULT
		To adjust CUSTOM
		Selecting a mode whose name includes CUSTOM and then
		pressing the ► button or the ENTER button displays a dialog to aid
		you in adjusting the mode.
		This function is useful when you want to
		change the brightness of particular tones.
		Choose an item using the ◄/► buttons,
		and adjust the level using the ▲/▼ buttons.
GAMMA		You can display a test pattern for checking the effect of your
		adjustment by pressing the ENTER button.
		Each time you press the ENTER button, the
		pattern changes as below.
		No pattern ð Gray scale of 9 steps
		Ramp  Gray scale of 15 steps
		The eight equalizing bars correspond to eight tone levels of the test
		pattern (Gray scale of 9 steps) except the darkest in the left end.
		If you want to adjust the 2nd tone from left end on the test pattern,
		use the equalizing adjustment bar “1”. The darkest tone at the left
		end of the test pattern cannot be controlled with any of equalizing
		adjustment bar.
		• Lines or other noise might appear on the
		screen when this function is operated, but it
		is not a malfunction.

(continued on next page)

© 3M 2009. All Rights Reserved. 27