3M™ Digital Projector X30N/X35N
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continued)
Phenomenon | Cases not involving a machine defect | Reference | |
page | |||
|
| ||
|
|
| |
| The signal cables are not correctly connected. | 9 | |
| Correctly connect the audio cables. | ||
|
| ||
| The MUTE function is working. | 16 | |
| Restore the sound pressing MUTE or VOLUME +/- button | ||
Sound does not | on the remote control. |
| |
The volume is adjusted to an extremely low level. |
| ||
come out. | 16 | ||
| Adjust the volume to a higher level using the menu function | ||
| or the remote control. |
| |
| The AUDIO SOURCE/SPEAKER setting is not correct. | 37 | |
| Correctly set the AUDIO SOURCE/SPEAKER in AUDIO | ||
| menu. |
| |
| The lens cover is attached. | 3 | |
| Remove the lens cover. | ||
|
| ||
| The signal cables are not correctly connected. | 9 | |
| Correctly connect the connection cables. | ||
|
| ||
| The brightness is adjusted to an extremely low level. | 27 | |
No pictures are | Adjust BRIGHTNESS to a higher level using the menu | ||
function. |
| ||
displayed. |
| ||
| The computer cannot detect the projector as a plug |
| |
| and play monitor. | 11 | |
| Make sure that the computer can detect a plug and play | ||
|
| ||
| monitor using another plug and play monitor. |
| |
| The BLANK screen is displayed. | 22 | |
| Press BLANK button on the remote control. | ||
|
| ||
Video screen | The FREEZE function is working. | 22 | |
display freezes. | Press FREEZE button to restore the screen to normal. | ||
| |||
| Color settings are not correctly adjusted. |
| |
Colors have a | Perform picture adjustments by changing the COLOR | 28, 32 | |
faded- out | TEMP, COLOR, TINT and/or COLOR SPACE settings, |
| |
appearance, or | using the menu functions. |
| |
Color tone is | COLOR SPACE setting is not suitable. |
| |
poor. | Change the COLOR SPACE setting to AUTO, RGB, | 32 | |
| SMPTE240, REC709 or REC601. |
|
(Continued on next page)
72 | © 3M 2009. All Rights Reserved. |