3M X35N Using the menu function continued, POSITION button, Indication in OSD On Screen Display

3M™ Digital Projector X30N/X35N

Operating

Using the menu function (continued)

3. To close the MENU, press the MENU button again or select EXIT and press the ◄ cursor button or ENTER button. The dialog will automatically disappear after about 30 seconds.

●If you want to move the menu position, use the cursor buttons after pressing the

POSITION button.

●Some functions cannot be performed when a certain input port is selected, or when a certain input signal is displayed.

●When you want to reset the operation, press RESET button on the remote control during the operation. Note that some items (ex. LANGUAGE, VOLUME) cannot be reset.

●In the ADVANCED MENU, when you want to return to the previous display, press the ◄ cursor button or ESC button on the remote control.

Indication in OSD (On Screen Display)

The meanings of the general words on the OSD are as follows.

Indication	Meaning
EXIT	Selecting this word finishes the OSD menu. It's the same as
	pressing the MENU button.
RETURN	Selecting this word returns the menu to the previous menu.
CANCEL or NO	Selecting this word cancels the operation in the present
	menu and returns to the previous menu.
OK or YES	Selecting this word executes the prepared function or shifts
	the menu to the next menu.

24 © 3M 2009. All Rights Reserved.