3M™ Digital Projector X30N/X35N
OPTION menu
Item
Description
| Using the ▲/▼ buttons adjusts the time to count down to | |
| automatically turn the projector off. | |
| Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE) | |
AUTO OFF | When the time is set to 0, the projector is not turned off automatically. | |
When the time is set to 1 to 99, and when the passed time with no- | ||
| signal or an unsuitable signal reaches at the set time, the projector | |
| lamp will be turned off. | |
| If one of the projector's buttons or the remote control buttons | |
| is pressed or one of the commands (except get commands) is | |
| transmitted to the CONTROL port during the corresponding time, | |
| projector will not be turned off. | |
| Please refer to the section “Turning off the power” (15). | |
| The lamp time is the usage time of the lamp, counted after the last | |
| resetting. It is shown in the OPTION menu. | |
| Pressing the RESET button on the remote control or the ► button | |
| of the projector displays a dialog. | |
LAMP TIME | To reset the lamp time, select the OK using the ► button. | |
CANCEL OK | ||
|
•Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.
•For the lamp replacement, see the section "Replacing the lamp"
(62, 63).
| The filter time is the usage time of the air filter, counted after the last | |
| resetting. It is shown in the OPTION menu. | |
| Pressing the RESET button on the remote control or the ► button | |
| of the projector displays a dialog. | |
FILTER TIME | To reset the filter time, select the OK using the ► button. | |
CANCEL OK | ||
| ||
| • Please reset the filter time only when you have cleaned or replaced | |
| the air filter, for a suitable indication about the air filter. | |
| • For the air filter cleaning, see the section “Cleaning and replacing | |
| the air filter” (64, 65). |
(continued on next page)
44 | © 3M 2009. All Rights Reserved. |