3M AUDIO menu, 3M Digital Projector X30N/X35N, Description, Volume, Speaker, Audio Source

3M™ Digital Projector X30N/X35N

AUDIO menu

AUDIO menu

From the AUDIO menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or the ENTER button to execute the item. Then perform it according to the following table.

Item		Description
VOLUME	Using the ◄/► buttons adjusts the volume.
	High ó Low
SPEAKER	Using the ▲/▼ buttons turns on/off the built-in speaker.
	ON ó OFF
	When OFF is selected, the built-in speaker does not work.
	The combination of a picture and audio input port can be arranged
	in the menu.
	The audio coming into the port selected in the (2) is output while an
	image from the port chosen in the (1) is on screen.
	(1) Choose a picture input port using the ▲/▼ buttons.
	COMPUTER IN1 ó COMPUTER IN2
	
	AUDIO OUT STANDBY	COMPONENT
	
	VIDEO ó S-VIDEO ó (Y, Cb/Pb, Cr/Pr)
	• Choose AUDIO OUT STANDBY, to
	select the audio output to the AUDIO OUT port in the standby
AUDIO SOURCE	mode. The built-in speaker does not work in the standby mode.
	• While RETURN is selected, pressing the ◄ button returns to the
	previous menu.
	(2) Select one of the AUDIO IN ports using ◄/► buttons.
	AUDIO IN1 ó AUDIO IN2 ó AUDIO IN3 ó
	• disables the audio output.
	• C.C. (Closed Caption) is automatically activated when is selected
	and an input signal containing C.C. is received. This function is
	available only when the signal is NTSC for VIDEO or S-VIDEO, or
	480i@60 for COMPONENT, COMPUTER IN1 or COMPUTER IN2,
	and when AUTO is selected for DISPLAY in the C.C. menu under the
	SCREEN menu (42).

© 3M 2009. All Rights Reserved. 37