3M S10C manual Using The Automatic Adjustment Feature, Correcting Keystone Distortions

Operating (continued)

Using The Automatic Adjustment Feature

VIDEO	RGB SEARCH
ASPECT	AUTO BLANK
MAGNIFY	VOLUME
ON
	MUTE
OFF
FREEZE	KEYSTONE
POSITION	MENU
	ENTER
ESC	RESET

1 Press the AUTO button. AUTO

Automatic Adjustment for RGB Input

Horizontal position (H POSITION), vertical position (V POSITION), clock phase (H PHASE) and horizontal size (H SIZE) are automatically adjusted.

Make sure that the application window is set to its maximum size prior to attempting to use this feature. Dark pictures may still be incorrectly adjusted. Use a bright screen when adjusting.

Automatic Adjustment for Video Input

The signal type best suited for the respective input signal is selected automatically.

This feature is available only if VIDEO is set to AUTO in the INPUT menu.

NOTE • The automatic adjustment operation requires approximately 10 seconds. Also, please note that it may not function correctly with some input.

Correcting Keystone Distortions

VIDEO	RGB SEARCH
ASPECT	AUTO BLANK
MAGNIFY	VOLUME
ON
	MUTE
OFF
FREEZE	KEYSTONE
POSITION	MENU
	ENTER
ESC	RESET

1	Press the KEYSTONE button.			KEYSTONE
	As illustrated on the right, a dialog will appear on
	the screen to aid you in correcting the distortion.
			KEYSTONE
				+0
2	Use the	,	buttons to correct distortion.

Press the KEYSTONE button again to close the dialog and complete this operation. (Even if you don't do anything, the dialog will automatically disappear after a few seconds.)

NOTE • When the WIDE is selected under the ASPECT item of the MAIN menu, this adjustment is ignored.

•The correcting keystone distortions function may not be work well with some types of input signals.

•The adjustable range for correcting keystone distortions will vary with the type of input signal.

19