3M S10C manual Projector Features, Preparation

Page 3

Projector Features

This multimedia projector is used to project various computer signals as well as NTSC / PAL / SECAM video signals onto a screen. Little space is required for installation and large images can easily be realized.

●Ultra High Brightness

Crisp, ultra-bright presentations is achieved by using a UHB (ultra high brightness) lamp and a highly efficient optical system.

●Whisper Mode Equipped

Special mode is available for reducing projector noise to achieve quieter operation.

●User Memory Function

This projector can memorize 4 settings by MY MEMORY function.

●Partial Magnification Function

Interesting parts of images can be magnified for closer viewing.

●Keystone Distortion Correction

Quick correction of distorted images electrically.

Preparation

Please see the “Quick Start Guide”.

Your projector should come with the items shown there. Contact your dealer anything is missing.

NOTE • Keep the original packing material for future reshipment.

Image 3

Contents S10C Multimedia Projector Contents Preparation Projector FeaturesPart Names ProjectorAttaching The Base Happened ProjectorRemote Control Arrangement Setting UpTwisting the elevator feet by hand Adjusting The Projectors ElevatorAdjust the height of the projector by As necessary, you can also finelyConnecting Your Devices Connecting to a DVD/VCR player Connecting Power Supply Putting Batteries Remote ControlRemove Battery cover Close Battery coverOperating The Remote Control Press the button of the projector Power ON/OFFTurning On The Power Or the remote controlUse the focus ring to focus the picture Selecting An Input SignalSelecting a RGB signal Press the RGB button of the remote Use the zoom ring to adjust the screen SizeTurning Off The Power Projector or the remote controlSwitch the power switch to O OFF Adjusting The Volume OperatingTemporarily Muting The Sound Adjusting The Position Use Buttons to adjust PositionPress the Position button Correcting Keystone Distortions Using The Automatic Adjustment FeaturePress the Magnify on button Using The Magnify FeatureUse Buttons to adjust the zoom Level Freezing The ScreenSignal Searching Selecting The Aspect RatioTemporarily Blanking The Screen Using The Menu Functions Multifunctional SettingsMain Menu Picture 1 Menu MY Memory Load/Save a SettingReset the PICTURE-1 Menu Items Picture 1 MenuSize PhasePicture 2 Menu Position3D-YCS Input MenuVideo Frame LockS2-ASPECT Input MenuVideo NR InformationAdjust Auto MenuSearch Screen Menu Start UPMessage Option Menu Screen TypeLamp Time Lamp Insert the new lamp, and tighten Replacing The LampUnscrew the 2 screws, and slowly Pick up the lamp by the handlesReplace the air filter and the filter cover Reset the filter timerAir Filter Caring For The Air FilterReplacing The Air Filter Caring For The Lens Caring For The Cabinet And Remote ControlOther Care Caring For The Inside Of The ProjectorRelated Messages TroubleshootingRelated Messages Power Lamp Temp Description Regarding The Indicator LampsIndicator Regarding The Indicator LampsPhenomena That May Easily Be Mistaken For Machine Defects Phenomena That May Easily Be Mistaken For Machine Defects Warranty And After-ServiceVideo Input Ports SpecificationsSpecification RGB Input Ports Audio PortsHow to Order Part NumberNot Included with Basic Packet DN00571 QR58731