3M S10C manual Caring For The Air Filter, Replace the air filter and the filter cover

Page 34

Air Filter

WARNING • Please carefully read the “User’s Manual - Safety Guide”.

•Before replacing the air filter, make sure the power switch is off and the power cable is not plugged in.

•Use the air filter of the specified type only. Type number: NJ08292 (sold separately)

•Do not use the projector with the air filter and filter cover removed. The use without

the air filter could result in damage.

CAUTION • Do not reset the filter timer without cleaning or replacing the air filter.

•If the air filter becomes clogged by dust or the like, internal temperature rises and could cause malfunction. The power is automatically turned off in order to prevent the projector from overheating internally.

•When you replace the lamp, please replace also the air filter. The air filter may be attached when you buy a replacement lamp for this projector. Please ask your dealer.

Caring For The Air Filter

The air filter should be cleaned about every 100 hours. If the indicators or a message prompts you to clean the air filter (see the section “Related Messages” and “Regarding The Indicator Lamps”), clean the air filter as soon as possible. If the air filter becomes clogged by dust or the like, internal temperature rises and could cause malfunction.

1 Turn off the projector, and unplug the power cord.

2

 

After making sure that the projector

 

 

has cooled adequately, remove the

 

 

 

 

filter cover. Hold the release buttons

of

 

 

the filter cover, while pulling up it.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hold the release buttons of the air

 

 

3

 

 

 

 

filter, while pulling down it.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Apply a vacum cleaner to the air filter

4

 

 

 

and the filter cover to clean.

 

 

 

 

 

 

 

 

 

 

Filter cover

Release buttons Release buttons

5

Replace the air filter and the filter cover.

Air filter

 

 

 

 

 

 

 

 

 

 

Reset the filter timer.

 

 

 

 

6

 

 

 

 

 

 

(1) Turn on the projector. While the projector running, press the MENU button to

 

 

 

open the menu.

 

 

 

 

 

 

(2)

Choose the “OPTION” on the menu using the

/

button, then press the

 

 

 

button or ENTER button.

 

 

 

 

 

 

(3)

Choose the “FILTER TIME” using the

/

button, then press and hold the

 

 

 

button of projector or the RESET button of remote control for 3 seconds.

 

 

(4)

Choose the “RESET” using the

button.

 

 

 

 

 

 

 

 

 

 

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents S10C Multimedia Projector Contents Projector Features PreparationProjector Part NamesAttaching The Base Projector HappenedRemote Control Setting Up ArrangementAs necessary, you can also finely Adjusting The Projectors ElevatorAdjust the height of the projector by Twisting the elevator feet by handConnecting Your Devices Connecting to a DVD/VCR player Connecting Power Supply Close Battery cover Remote ControlRemove Battery cover Putting BatteriesOperating The Remote Control Or the remote control Power ON/OFFTurning On The Power Press the button of the projectorUse the zoom ring to adjust the screen Size Selecting An Input SignalSelecting a RGB signal Press the RGB button of the remote Use the focus ring to focus the pictureProjector or the remote control Turning Off The PowerSwitch the power switch to O OFF Operating Adjusting The VolumeTemporarily Muting The Sound Use Buttons to adjust Position Adjusting The PositionPress the Position button Using The Automatic Adjustment Feature Correcting Keystone DistortionsFreezing The Screen Using The Magnify FeatureUse Buttons to adjust the zoom Level Press the Magnify on buttonSelecting The Aspect Ratio Signal SearchingTemporarily Blanking The Screen Multifunctional Settings Using The Menu FunctionsMain Menu Picture 1 Menu Picture 1 Menu Load/Save a SettingReset the PICTURE-1 Menu Items MY MemoryPosition PhasePicture 2 Menu SizeFrame Lock Input MenuVideo 3D-YCSInformation Input MenuVideo NR S2-ASPECTAuto Menu AdjustSearch Start UP Screen MenuMessage Screen Type Option MenuLamp Time Lamp Pick up the lamp by the handles Replacing The LampUnscrew the 2 screws, and slowly Insert the new lamp, and tightenCaring For The Air Filter Reset the filter timerAir Filter Replace the air filter and the filter coverReplacing The Air Filter Caring For The Inside Of The Projector Caring For The Cabinet And Remote ControlOther Care Caring For The LensTroubleshooting Related MessagesRelated Messages Regarding The Indicator Lamps Power Lamp Temp DescriptionRegarding The Indicator Lamps IndicatorPhenomena That May Easily Be Mistaken For Machine Defects Warranty And After-Service Phenomena That May Easily Be Mistaken For Machine DefectsRGB Input Ports Audio Ports SpecificationsSpecification Video Input PortsPart Number How to OrderNot Included with Basic Packet DN00571 QR58731
Top Page Image Contents