3M S10C manual DN00571 QR58731

Page 45

Intended Use

Before operating this machine, please read this entire manual thoroughly. The 3MTM Multimedia Projectors are designed, built, and tested for use indoors, using 3M lamps, 3M ceiling mount hardware, and nominal local voltages.

The use of other replacement lamps, outdoor operation, or different voltages has not been tested and could damage the projector peripheral equipment and/or create a potentially unsafe operating condition.

3M Multimedia projectors and Wall Display Systems are designed to operate in a normal office environment.

16° to 29°C (60° to 85° F)

10- 80 %RH (without condensation)

0- 1828 m (0-6000 feet) above sea level

The ambient operating environment should be free of airborne smoke, grease, oil and other contaminates that can affect the operation or performance of the projector.

Use of this product in adverse conditions will void the product warranty.

Let us help you make the most of your next presentation. We offer everything from presentation supplies to tips for better meetings. And we’re the only transparency manufacturer that offers a recycling program for your used transparencies. For late-breaking news, handy reference and free product samples, call us toll-free in the continental United States and Canada, 24 hours a day, or visit our Internet Website.

3M Austin Center

3M Canada

3M Mexico, S.A. de C.V.

3M Europe

 

Building A145-5N-01

P.O. Box 5757

Apartado Postal 14-139

Boulevard de l’Oise

 

6801 River Place Blvd.

London, Ontario

Mexico, D.F. 07000

95006 Cerge Pontoise Cedex

 

Austin, TX 78726-9000

N6A 4T1

Mexico

France

Litho in Japan

 

 

 

 

© 3M 2003

DN00571 (QR58731)

Image 45
Contents S10C Multimedia Projector Contents Preparation Projector FeaturesPart Names ProjectorAttaching The Base Happened ProjectorRemote Control Arrangement Setting UpAdjust the height of the projector by Adjusting The Projectors ElevatorAs necessary, you can also finely Twisting the elevator feet by handConnecting Your Devices Connecting to a DVD/VCR player Connecting Power Supply Remove Battery cover Remote ControlClose Battery cover Putting BatteriesOperating The Remote Control Turning On The Power Power ON/OFFOr the remote control Press the button of the projectorSelecting a RGB signal Press the RGB button of the remote Selecting An Input SignalUse the zoom ring to adjust the screen Size Use the focus ring to focus the pictureTurning Off The Power Projector or the remote controlSwitch the power switch to O OFF Adjusting The Volume OperatingTemporarily Muting The Sound Adjusting The Position Use Buttons to adjust PositionPress the Position button Correcting Keystone Distortions Using The Automatic Adjustment FeatureUse Buttons to adjust the zoom Level Using The Magnify FeatureFreezing The Screen Press the Magnify on buttonSignal Searching Selecting The Aspect RatioTemporarily Blanking The Screen Using The Menu Functions Multifunctional SettingsMain Menu Picture 1 Menu Reset the PICTURE-1 Menu Items Load/Save a SettingPicture 1 Menu MY MemoryPicture 2 Menu PhasePosition SizeVideo Input MenuFrame Lock 3D-YCSVideo NR Input MenuInformation S2-ASPECTAdjust Auto MenuSearch Screen Menu Start UPMessage Option Menu Screen TypeLamp Time Lamp Unscrew the 2 screws, and slowly Replacing The LampPick up the lamp by the handles Insert the new lamp, and tightenAir Filter Reset the filter timerCaring For The Air Filter Replace the air filter and the filter coverReplacing The Air Filter Other Care Caring For The Cabinet And Remote ControlCaring For The Inside Of The Projector Caring For The LensRelated Messages TroubleshootingRelated Messages Power Lamp Temp Description Regarding The Indicator LampsIndicator Regarding The Indicator LampsPhenomena That May Easily Be Mistaken For Machine Defects Phenomena That May Easily Be Mistaken For Machine Defects Warranty And After-ServiceSpecification SpecificationsRGB Input Ports Audio Ports Video Input PortsHow to Order Part NumberNot Included with Basic Packet DN00571 QR58731