3M S10C manual Other Care, Caring For The Inside Of The Projector, Caring For The Lens

Page 36

Other Care

WARNINGPlease carefully read the “Product Safety Guide”.

Before replacing the air filter, make sure the power switch is off and the power cable is not plugged in.

ATTENTION • Do not use cleaners or chemicals other than those listed below, including benzene and paint thinner.

Do not use aerosols or sprays.

Do not polish or wipe with hard objects.

Caring For The Inside Of The Projector

In order to ensure the safe use of your projector, please have it cleaned and inspected by your local dealer about once every 2 years. Never try to care for the inside of the unit yourself. Doing so is dangerous.

Caring For The Lens

 

 

Turn off the projector, and unplug the

 

 

 

1

 

 

 

 

power cord.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lightly wipe the lens with a

 

 

 

2

 

 

 

commercially available lens-cleaning

 

 

 

 

wipe. Do not touch the lens directly

 

 

 

with your hand.

Lens

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Caring For The Cabinet And Remote Control

 

 

 

 

 

 

 

 

 

Turn off the projector, and unplug the power cord.

 

1

 

 

 

 

 

 

 

 

 

 

 

 

 

2

Wipe lightly with gauze or a soft cloth.

 

 

 

If soiling is severe, dip soft cloth in water or a neutral cleaner dilute in water, and

wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.

36

Image 36
Contents S10C Multimedia Projector Contents Projector Features PreparationPart Names ProjectorAttaching The Base Projector HappenedRemote Control Setting Up ArrangementAdjusting The Projectors Elevator Adjust the height of the projector byAs necessary, you can also finely Twisting the elevator feet by handConnecting Your Devices Connecting to a DVD/VCR player Connecting Power Supply Remote Control Remove Battery coverClose Battery cover Putting BatteriesOperating The Remote Control Power ON/OFF Turning On The PowerOr the remote control Press the button of the projectorSelecting An Input Signal Selecting a RGB signal Press the RGB button of the remoteUse the zoom ring to adjust the screen Size Use the focus ring to focus the pictureTurning Off The Power Projector or the remote controlSwitch the power switch to O OFF Adjusting The Volume OperatingTemporarily Muting The Sound Adjusting The Position Use Buttons to adjust PositionPress the Position button Using The Automatic Adjustment Feature Correcting Keystone DistortionsUsing The Magnify Feature Use Buttons to adjust the zoom LevelFreezing The Screen Press the Magnify on buttonSignal Searching Selecting The Aspect RatioTemporarily Blanking The Screen Multifunctional Settings Using The Menu FunctionsMain Menu Picture 1 Menu Load/Save a Setting Reset the PICTURE-1 Menu ItemsPicture 1 Menu MY MemoryPhase Picture 2 MenuPosition SizeInput Menu VideoFrame Lock 3D-YCSInput Menu Video NRInformation S2-ASPECTAdjust Auto MenuSearch Screen Menu Start UPMessage Option Menu Screen TypeLamp Time Lamp Replacing The Lamp Unscrew the 2 screws, and slowlyPick up the lamp by the handles Insert the new lamp, and tightenReset the filter timer Air FilterCaring For The Air Filter Replace the air filter and the filter coverReplacing The Air Filter Caring For The Cabinet And Remote Control Other CareCaring For The Inside Of The Projector Caring For The LensTroubleshooting Related MessagesRelated Messages Regarding The Indicator Lamps Power Lamp Temp DescriptionRegarding The Indicator Lamps IndicatorPhenomena That May Easily Be Mistaken For Machine Defects Warranty And After-Service Phenomena That May Easily Be Mistaken For Machine DefectsSpecifications SpecificationRGB Input Ports Audio Ports Video Input PortsHow to Order Part NumberNot Included with Basic Packet DN00571 QR58731