3M S10C manual Projector, Happened

Page 5

Part Names (continued)

The Projector (continued)

19keystone button

turns on/off the KEYSTONE

mode.

In the KEYSTONE mode,

To adjust the keystone,

video button 15

toggles between the signal ports of video, s-videoand component video.

cursor buttons 22

works for adjusting or menu controlling.

on/off button 14

prepares for turning the power on/off.

temp indicator 14

lights or blinks when any problem about internal temperature has happened.

use the cursor / buttons.

Control buttons

22reset button

cancels the adjustment in progress.

*The adjustments of the volume etc. are not reset.

15rgb button

selects the input signal of rgb port.

22menu button

opens/closes the menu.

39power indicator

tells the state of power supply. Refer to the section “Power ON/OFF”.

39lamp indicator

lights or blinks when any problem about the lamp has

							happened.
	audio				R port	10
	audio				R port	10
					L port	10
					L port	10
	(from a video equipment)
	audio port			10
	(from a computer)
	s-video port			10
	video port			10			10 control
	component video - Y 10						port
	component video - Y 10						10 rgb port
	component video - CB/PB					10	10 rgb port
	component video - CB/PB					10

14 Power switch

component video - CR/PR 10

11 AC inlet

Projector (Rear/Left)

5

Image 5

Contents S10C Multimedia Projector Contents Preparation Projector FeaturesAttaching The Base Part NamesProjector Happened ProjectorRemote Control Arrangement Setting UpAdjust the height of the projector by Adjusting The Projectors ElevatorAs necessary, you can also finely Twisting the elevator feet by handConnecting Your Devices Connecting to a DVD/VCR player Connecting Power Supply Remove Battery cover Remote ControlClose Battery cover Putting BatteriesOperating The Remote Control Turning On The Power Power ON/OFFOr the remote control Press the button of the projectorSelecting a RGB signal Press the RGB button of the remote Selecting An Input SignalUse the zoom ring to adjust the screen Size Use the focus ring to focus the pictureSwitch the power switch to O OFF Turning Off The PowerProjector or the remote control Temporarily Muting The Sound Adjusting The VolumeOperating Press the Position button Adjusting The PositionUse Buttons to adjust Position Correcting Keystone Distortions Using The Automatic Adjustment FeatureUse Buttons to adjust the zoom Level Using The Magnify FeatureFreezing The Screen Press the Magnify on buttonTemporarily Blanking The Screen Signal SearchingSelecting The Aspect Ratio Using The Menu Functions Multifunctional SettingsMain Menu Picture 1 Menu Reset the PICTURE-1 Menu Items Load/Save a SettingPicture 1 Menu MY MemoryPicture 2 Menu PhasePosition SizeVideo Input MenuFrame Lock 3D-YCSVideo NR Input MenuInformation S2-ASPECTSearch AdjustAuto Menu Message Screen MenuStart UP Lamp Time Option MenuScreen Type Lamp Unscrew the 2 screws, and slowly Replacing The LampPick up the lamp by the handles Insert the new lamp, and tightenAir Filter Reset the filter timerCaring For The Air Filter Replace the air filter and the filter coverReplacing The Air Filter Other Care Caring For The Cabinet And Remote ControlCaring For The Inside Of The Projector Caring For The LensRelated Messages TroubleshootingRelated Messages Power Lamp Temp Description Regarding The Indicator LampsIndicator Regarding The Indicator LampsPhenomena That May Easily Be Mistaken For Machine Defects Phenomena That May Easily Be Mistaken For Machine Defects Warranty And After-ServiceSpecification SpecificationsRGB Input Ports Audio Ports Video Input PortsNot Included with Basic Packet How to OrderPart Number DN00571 QR58731