3M S10C Warranty And After-Service, Phenomena That May Easily Be Mistaken For Machine Defects

Page 42

Troubleshooting (continued)

Phenomena That May Easily Be Mistaken For Machine Defects (continued)

Phenomenon

Cases not involving a machine defect,

Reference

and Items to be confirmed

pages

 

 

 

 

 

The brightness setting and/or contrast setting has not been

 

 

properly adjusted.

 

 

Perform picture adjustments by changing the BRIGHT and/or

23

Pictures appear

CONTRAST settings, etc.

 

dark.

The WHISPER mode is the current setting.

 

 

Change (by releasing) from the WHISPER mode.

 

 

 

 

 

Lamp is approaching the end of its product lifetime.

32,33

 

Exchange the old lamp with a new lamp.

 

 

 

 

 

 

Either the FOCUS setting or the H PHASE is not properly

 

Pictures appear

adjusted.

15,26

Adjust the focus and the H PHASE setting.

 

blurry.

 

 

 

The lens is dirty or misty.

36

 

 

Clean the lens.

 

 

 

 

 

Warranty And After-Service

If a problem occurs with the equipment, first refer to the “Troubleshooting” section of this manual, and run through the suggested checks. If this does not resolve the problem contact your dealer or service company. They will tell you what warranty condition is applied.

42

Image 42
Contents S10C Multimedia Projector Contents Projector Features PreparationPart Names ProjectorAttaching The Base Projector HappenedRemote Control Setting Up ArrangementAs necessary, you can also finely Adjusting The Projectors ElevatorAdjust the height of the projector by Twisting the elevator feet by handConnecting Your Devices Connecting to a DVD/VCR player Connecting Power Supply Close Battery cover Remote ControlRemove Battery cover Putting BatteriesOperating The Remote Control Or the remote control Power ON/OFFTurning On The Power Press the button of the projectorUse the zoom ring to adjust the screen Size Selecting An Input SignalSelecting a RGB signal Press the RGB button of the remote Use the focus ring to focus the pictureTurning Off The Power Projector or the remote controlSwitch the power switch to O OFF Adjusting The Volume OperatingTemporarily Muting The Sound Adjusting The Position Use Buttons to adjust PositionPress the Position button Using The Automatic Adjustment Feature Correcting Keystone DistortionsFreezing The Screen Using The Magnify FeatureUse Buttons to adjust the zoom Level Press the Magnify on buttonSignal Searching Selecting The Aspect RatioTemporarily Blanking The Screen Multifunctional Settings Using The Menu FunctionsMain Menu Picture 1 Menu Picture 1 Menu Load/Save a SettingReset the PICTURE-1 Menu Items MY MemoryPosition PhasePicture 2 Menu SizeFrame Lock Input MenuVideo 3D-YCSInformation Input MenuVideo NR S2-ASPECTAdjust Auto MenuSearch Screen Menu Start UPMessage Option Menu Screen TypeLamp Time Lamp Pick up the lamp by the handles Replacing The LampUnscrew the 2 screws, and slowly Insert the new lamp, and tightenCaring For The Air Filter Reset the filter timerAir Filter Replace the air filter and the filter coverReplacing The Air Filter Caring For The Inside Of The Projector Caring For The Cabinet And Remote ControlOther Care Caring For The LensTroubleshooting Related MessagesRelated Messages Regarding The Indicator Lamps Power Lamp Temp DescriptionRegarding The Indicator Lamps IndicatorPhenomena That May Easily Be Mistaken For Machine Defects Warranty And After-Service Phenomena That May Easily Be Mistaken For Machine DefectsRGB Input Ports Audio Ports SpecificationsSpecification Video Input PortsHow to Order Part NumberNot Included with Basic Packet DN00571 QR58731