3M S10C manual Screen Menu, Start UP, Message

Multifunctional Settings (continued)

SCREEN Menu

With the SCREEN menu, the items shown in the table below can be performed.

Perform each operation in accordance with the instructions in the table below.

MENU

MAIN	BLANK	BLACK
PICTURE-1	START UP	TURN ON
PICTURE-2 MENU POSITION
INPUT	MESSAGE	TURN ON
AUTO	RESET
SCREEN
OPTION

: SELECT

Item Description

Select a Blank Screen Color:

BLUE ⇔ WHITE ⇔ BLACK

BLANK • The blank screen of selected color is displayed by pressing the BLANK button. Please refer to the section “Temporarily Blanking The Screen” of “Operating” about the screen blanking.

	Select the Start Up Screen:
START UP	TURN ON	⇔	TURN OFF
	• If the TURN ON is selected when there is no signal or the detected signal is
	out of specifications, the blank screen is displayed.

Adjust a Menu Position:

Pressing the or ENTER button start adjusting,

Up

MENU POSITION Left Right

Down

•The button does not finish this item. When you want to return to the previous display, please press the ESC button.

Select the Message Mode:

	TURN ON	⇔	TURN OFF
	• When the TURN OFF is selected, the following message functions are
	disabled:
MESSAGE	The message of “AUTO IN PROGRESS”
	The message of “NO INPUT IS DETECTED”
	The message of “SYNC IS OUT OF RANGE”
	The message while being searched for an input signal, “Searching …..”
	The message when an input signal is detected, “Detecting …..”
	The indication of the input signal by input change.
	Reset the SCREEN Menu Items:
RESET	Selecting the EXECUTE performs this function.
	EXECUTE	⇒ CANCEL
	• The items of the SCREEN menu are collectively returned to the initial setting.

30