3M S10C manual Adjusting The Projectors Elevator, As necessary, you can also finely

Page 8

Setting Up (continued)

Adjusting The Projector's Elevator

CAUTION • If you press the elevator buttons without holding the projector, the projector might crash down, overturn, smash your fingers and possibly result in malfunction. To prevent damaging the projector and injuring yourself, ALWAYS HOLD THE PROJECTOR whenever using the elevator buttons to adjust the elevator feet.

You can use the elevator feet to make adjustments if the surface on which you need to set the projector is uneven or if you otherwise need to adjust the angle of projection. The adjustment range of the elevator feet is 0 to 9 degrees.

1 Press and hold in the elevator buttons.

2

Raise or lower the projector to the

 

desired height and then release the

 

elevator buttons.

 

When you release the elevator buttons, the elevator

 

feet will lock into position.

 

 

 

 

3

As necessary, you can also finely

 

adjust the height of the projector by

twisting the elevator feet by hand.

Elevator buttons

Elevator feet

8

Image 8
Contents S10C Multimedia Projector Contents Projector Features PreparationAttaching The Base Part NamesProjector Projector HappenedRemote Control Setting Up ArrangementAdjusting The Projectors Elevator Adjust the height of the projector byAs necessary, you can also finely Twisting the elevator feet by handConnecting Your Devices Connecting to a DVD/VCR player Connecting Power Supply Remote Control Remove Battery coverClose Battery cover Putting BatteriesOperating The Remote Control Power ON/OFF Turning On The PowerOr the remote control Press the button of the projectorSelecting An Input Signal Selecting a RGB signal Press the RGB button of the remoteUse the zoom ring to adjust the screen Size Use the focus ring to focus the pictureSwitch the power switch to O OFF Turning Off The PowerProjector or the remote control Temporarily Muting The Sound Adjusting The VolumeOperating Press the Position button Adjusting The PositionUse Buttons to adjust Position Using The Automatic Adjustment Feature Correcting Keystone DistortionsUsing The Magnify Feature Use Buttons to adjust the zoom LevelFreezing The Screen Press the Magnify on buttonTemporarily Blanking The Screen Signal SearchingSelecting The Aspect Ratio Multifunctional Settings Using The Menu FunctionsMain Menu Picture 1 Menu Load/Save a Setting Reset the PICTURE-1 Menu ItemsPicture 1 Menu MY MemoryPhase Picture 2 MenuPosition SizeInput Menu VideoFrame Lock 3D-YCSInput Menu Video NRInformation S2-ASPECTSearch AdjustAuto Menu Message Screen MenuStart UP Lamp Time Option MenuScreen Type Lamp Replacing The Lamp Unscrew the 2 screws, and slowlyPick up the lamp by the handles Insert the new lamp, and tightenReset the filter timer Air FilterCaring For The Air Filter Replace the air filter and the filter coverReplacing The Air Filter Caring For The Cabinet And Remote Control Other CareCaring For The Inside Of The Projector Caring For The LensTroubleshooting Related MessagesRelated Messages Regarding The Indicator Lamps Power Lamp Temp DescriptionRegarding The Indicator Lamps IndicatorPhenomena That May Easily Be Mistaken For Machine Defects Warranty And After-Service Phenomena That May Easily Be Mistaken For Machine DefectsSpecifications SpecificationRGB Input Ports Audio Ports Video Input PortsNot Included with Basic Packet How to OrderPart Number DN00571 QR58731