3M S10C manual Picture 1 Menu, Load/Save a Setting, MY Memory, Reset the PICTURE-1 Menu Items

Multifunctional Settings (continued)

PICTURE - 1 Menu (continued)

Item Description

Load/Save a Setting:

Selecting one from the following and then pressing the or the ENTER button performs each function.

LOAD1 ⇔ LOAD2

⇔ LOAD3 ⇔ LOAD4

⇒

⇒ SAVE1 ⇔ SAVE2 ⇔ SAVE3 ⇔ SAVE4

•This projector has 4 memories called M1, M2, M3 and M4 for settings.

MY MEMORY	Performing the SAVE1, SAVE2, SAVE3 or SAVE4 puts the current setting data
	on the memory whose number corresponds. Performing the LOAD1, LOAD2,
	LOAD3 or LOAD4 calls the data of memory whose number corresponds, and
	adjusts the picture automatically depending on the data.

•The LOAD1, LOAD2, LOAD3 or LOAD4 cannot be selected when there is no memory whose number corresponds.

•At a different signal input from the signal that was being inputted when the setting was memorized, the picture may not be adjusted correctly.

	Reset the PICTURE-1 Menu Items:
	Selecting the EXECUTE performs this function.
RESET	EXECUTE	⇒ CANCEL
	• The items of the PICTURE-1 menu are collectively returned to the initial
	setting. Note that the items MY MEMORY and CUSTOM - GAMMA are not
	reset.

25