Meridian Audio D-ILA 1080MF2 operation manual Adjustments and Settings Using Menus, Menu Structure

Page 22

Adjustments and Settings Using Menus

The menus displayed on the screen are used to perform adjustment and setting for this unit.

Menu Structure

The menus of this unit have the following structure.

Main Menu

Image adjust	Gamma	NORMAL	A B	CUSTOM
Image adjust
Set up	Color temp.	D65	USER1	USER2
Set up	RED
	RED
Options	GREEN
	GREEN
Information	BLUE
	Test pattern	ENTER

1“Image adjust” Menu

Submenu (Setting Menu)

Image adjust	Gamma	NORMAL	A	B	CUSTOM
Image adjust
Set up	Color temp.	D65	USER1		USER2
Set up	RED
	RED
Options	GREEN
	GREEN
Information	BLUE
	Test pattern	ENTER
E.g.: “Gamma” Setting Menu
Image adjust	Gamma	NORMAL	A	B	CUSTOM
Image adjust
Set up	Color temp.	D65	USER1		USER2
Set up	RED
	RED
Options	GREEN
	GREEN
Information	BLUE				*1
	Test pattern	ENTER			*1

E.g.: “Test pattern” Setting Menu

Image adjust

Menu Position

Image adjust	Menu Position

Mask	2.5%	5%	Off
Set up	60P	50P
Source	60P	50P

Options

Information

2“Set up” Menu

Image adjust	Menu display		15sec	On
Image adjust
Set up	Flip H		On	Off
Set up	Flip V		On	Off
	Flip V		On	Off
Options	Picture Shift	0
	Picture Shift	0
Information	Sleep time	15min	30min	60min	Off
	RS232C(bps)		9600	19200

Mask	2.5%	5%	Off
Set up	60P	50P
Source	60P	50P
Options
Information

E.g.: “Menu Position” Setting Menu

Image adjust	Menu display		15sec	On
Image adjust
Set up	Flip H		On	Off
Set up	Flip V		On	Off
	Flip V		On	Off
Options	Picture Shift	0
	Picture Shift	0
Information	Sleep time	15min	30min	60min	Off
	RS232C(bps)		9600	19200

3 “Options” Menu		E.g.: “Menu display” Setting Menu
Image adjust	Lamp Time	905h
Image adjust
Set up
Options
Information

4“Information” Menu

*1 Press the [ENTER] button to switch to the test pattern image. There are 10 types of test patterns. Press the [ENTER] or [TEST] buttons to alter the test pattern to be projected.

22

Image 22

Contents ILA 1080MF2 Machine Noise Information Germany only About the installation placeFCC Information U.S.A. only About burning-in of the D-ILA deviceDo not allow any unqualified person to install the unit Power cordHow To Replace The Fuse Do not cut off the main plug from this equipmentStandard for gauging replacement time of components Contents AccessoriesControls and Features Front Side/Top Surface/Left SideRear Side/Right Side/Bottom Surface Sync OUT Terminal RS-232C Terminal D-sub 9 Pin Connector PanelService Terminal DVI Terminal DVI-D 24 PinControl Panel Indicator Display on the Control Panel Remote Control Open the back cover Loading Batteries into the Remote ControlPrecautions for Using Batteries Load the batteriesPrecaution for Usage Installing the ProjectorInstallation Environment Adjusting the InclinationPrecautions for Ceiling-mount Projector and Screen InstallationMounting this Unit Screen Installation Screen Size and Projection Distance When reflecting off a screen Effective Range of Remote Control Unit When directing remote control unit toward this unit Right Side of this unit Connecting to Various DevicesConnecting to Devices Control from external deviceConnecting the Power Cord supplied When using this unit, remove the lens capAdjusting zoom screen size Basic Operation ProceduresTurning on the power Adjusting focusHiding the image temporarily Turning off the powerPull out the power plug from the power outlet Press HideAdjustments and Settings Using Menus Menu StructureButton Function This Unit Remote Control Unit Menu Operation ButtonsPress 5/ ∞ to select a main menu item and Enter Press the Menu buttonTo confirm Set up Menu Menu ConfigurationImage adjust Menu Options MenuProject image onto the screen Press 5/∞ to select Set up, followed by pressingScreen Masking Press the Menu buttonPicture Shift Setting Press 5/∞ to select Options, followed by press Ing EnterReplacing the Lamp About Lamp ReplacementLight-source Lamp and Lamp Usage Time Insert the new lamp unit until it is fully Loosen the screws on the lamp unit and lift up the handlePull out the lamp unit Tighten the screws of the lamp unit Close the handleTo ensure the lamp time has been reset Resetting Lamp TimeInsert plug into the power outlet ExitCleaning and Replacing the Filter What to do when these messages are displayed Message Cause DetailsPlease follow the procedures below About warning indicatorsIndicator Actions to be taken upon warning indicationsTroubleshooting Pin Arrangement Pin No Signal NameTerminal Description RS-232C TerminalRS-232C External Control Operation mode Only Asking command is possible External control command tableSpecial parameters Specifications Bottom Dimensions Unit mm TopFront SideMF2MIman v0.90ß