Meridian Audio D-ILA 1080MF2 operation manual Specifications

Page 38

Specifications

 Model Name/ Article Name

D-ILA1080MF2D-ILA Home Theatre Projector

 

 

 Emission Method

D-ILA*1(Reflective Active Matrix Principle)

 Display Panel/Size

D-ILA Device*2/0.82" (1920 pixels x 1080 pixels) x 3 (Total no. of pixels: Approx. 6,220,000)

 Projection Lens

x 1.3 zoom lens (1.8:1 to 2.35:1) (Zoom/Focus adjustment: manual)

 

 

 Light-source Lamp

250 W Ultra-high Pressure Mercury Lamp

 

[Part No.: BHL5006-S / Rating: 250 W]

 

 

 Screen Size

Approx. 40" to 200" (Aspect ratio: 16:9)

 

 

 

 Projection Distance

Approx. 1.5 m to 12 m

 

 

 

 Input Signal

1080/60p signal, 1080/50p signal

 

 

 

 Resolution

1920 dots x 1080 dots

 

 

 

 

 Input Sync Frequency

Horizontal

: 56.25 kHz, 67.43 kHz, 67.5 kHz

 

Vertical

: 50 Hz, 59.94 Hz, 60 Hz

 

 

 

 Input Terminals

DVI

1-line, DVI-D (single-24pin) terminal, HDCP-compatible*3

VIDEO IN

RS-232C

1-line, D-sub 9 pin x 1 (External control)

CONTROL

SERVICE

1-line, stereo mini-jack x 1 (For Service)

 

 

 Output Terminal

SYNC OUT 1-line, stereo mini-jack x 1 (For Service)

CONTROL

 

 

 

 

 

 Power Requirements

AC 100 V - 240 V, 50 Hz/60 Hz

 

 

 Rated Power

3.5 A (100V AC) - 1.4 A (240V AC)

 

 

 

 Operation Environment

Temperature

41 °F to 95 °F (+5 °C to +35 °C)

 

Humidity

20% to 80% (No condensation)

 

Storage Temperature

14 °F to 140 °F (-10 °C to +60 °C)

 

 

 Dimensions

Approx. 11 7/10" x approx. 5 3/10" x approx. 14 1/5" (Approx. 298 mm x 134 mm x 360 mm)

(Width x Height x Depth)

(Excluding carrying handle, lens and protrusion portion)

 

 

 Mass

Approx. 13.7 lbs (Approx. 6.2 kg)

 

 

 

 

 Accessories

(Page 6)

 

 

 

 

 

 

*1 D-ILA is the abbreviation for Direct drive Image Light Amplifier.

*2 D-ILA devices are manufactured using extremely high-precision technology. Pixel effectiveness is 99.99%. Only 0.01% or less of the pixels would either not lit up or remain permanently lit up.

*3 The image of DVI-D input terminal may not be displayed due to HDCP specification change.

Design and specifications are subject to change without prior notice.

Please note that some of the pictures and illustrations may have been abridged, enlarged or contextualized in order to aid comprehension. Images may differ from the actual product.

38D-ILA

Image 38
Contents ILA 1080MF2 Machine Noise Information Germany only About the installation placeFCC Information U.S.A. only About burning-in of the D-ILA deviceDo not allow any unqualified person to install the unit Power cordHow To Replace The Fuse Do not cut off the main plug from this equipmentStandard for gauging replacement time of components Contents AccessoriesControls and Features Front Side/Top Surface/Left SideRear Side/Right Side/Bottom Surface Sync OUT Terminal RS-232C Terminal D-sub 9 Pin Connector PanelService Terminal DVI Terminal DVI-D 24 PinControl Panel Indicator Display on the Control Panel Remote Control Open the back cover Loading Batteries into the Remote ControlPrecautions for Using Batteries Load the batteriesPrecaution for Usage Installing the ProjectorInstallation Environment Adjusting the InclinationMounting this Unit Projector and Screen InstallationPrecautions for Ceiling-mount  Screen Installation Screen Size and Projection Distance When directing remote control unit toward this unit Effective Range of Remote Control Unit When reflecting off a screen Right Side of this unit Connecting to Various DevicesConnecting to Devices  Control from external deviceConnecting the Power Cord supplied When using this unit, remove the lens capAdjusting zoom screen size Basic Operation ProceduresTurning on the power Adjusting focusHiding the image temporarily Turning off the powerPull out the power plug from the power outlet Press HideAdjustments and Settings Using Menus Menu StructureButton Function This Unit Remote Control Unit Menu Operation ButtonsTo confirm Press the Menu buttonPress 5/ ∞ to select a main menu item and Enter Set up Menu Menu ConfigurationImage adjust Menu Options MenuProject image onto the screen Press 5/∞ to select Set up, followed by pressingScreen Masking Press the Menu buttonPicture Shift Setting Press 5/∞ to select Options, followed by press Ing EnterLight-source Lamp and Lamp Usage Time About Lamp ReplacementReplacing the Lamp Insert the new lamp unit until it is fully Loosen the screws on the lamp unit and lift up the handlePull out the lamp unit Tighten the screws of the lamp unit Close the handleTo ensure the lamp time has been reset Resetting Lamp TimeInsert plug into the power outlet ExitCleaning and Replacing the Filter What to do when these messages are displayed Message Cause DetailsPlease follow the procedures below  About warning indicatorsIndicator  Actions to be taken upon warning indicationsTroubleshooting Pin Arrangement Pin No Signal NameTerminal Description  RS-232C TerminalRS-232C External Control Special parameters External control command tableOperation mode Only Asking command is possible Specifications Bottom  Dimensions Unit mm TopFront SideMF2MIman v0.90ß