Rear and Terminals
Terminals
1 | 2 |
| 3 |
|
| 4 |
VIDEO IN | COMPONENTVIDEO IN 2 |
| ||||
| Y | PB/CB PR/CR | Y | PB/CB | PR/CR |
|
|
|
|
| REMOTE |
| TRIG. LIGHT |
RGB IN |
| IN | 1 | |||
|
|
|
| INT. EXT. |
| OFF ON |
|
|
|
|
| OUT | 2 |
11 |
| 10 |
| 9 |
| 8 |
| 7 |
| 6 |
| 5 |
Lamp cover
❖Terminals
zVIDEO IN jack
Connect to the video (composite) output of a video device.
x
Connect to the
cCOMPONENT VIDEO IN 1 & 2 jacks
Jacks 1 and 2 have each Y, PB /CB and PR /CR jacks.
Connect to the component video output of a video device, AV amp/processor, DVD player, etc.
vTRIG. 1 (TRIGGER 1) jack
Use to control an external unit from this projector by interlocking the external unit to power ON/OFF (standby) on this projector. The TRIG. 1 jack outputs 0 V when the projector is on standby and 12 V when POWER button is in the on position.
Note:
IR sensor
10
10
Lamp cover | 11 |
securing screw
12
,REMOTE switch (INT. / EXT.)
Set to “EXT.” to control this projector from another connected Marantz product, whereas set to “INT.” to control this projector and other connected products from this projector.
.
This is the control terminal for custom installers.
⁄0DVI-D IN jack
Connect to the RGB digital output of a video device or PC. Note: When using the
as explained in the precautions on pg. 16.
⁄1RGB IN jack
Connect to the RGB output of a video device or PC.
Bottom
ENGLISH
To connect with external devices, use an ordinal 35mm mini- plug (mono) cable with attaching the supplied ferrite core.
bLIGHT ON/OFF switch
Switches the terminal lamps on/off.
nTRIG. 2 (TRIGGER 2) jack
The TRIG. 2 jack outputs 12 V in each aspect ratio mode (Full, Normal, Zoom or Through). For setting instructions, see “Trigger 2” (☞ pg. 33).
Notes:
•Do not use the TRIG. 1 or 2 jack for power supply.
•To connect with external devices, use an ordinal 35mm mini- plug (mono) cable with attaching the supplied ferrite core.
mREMOTE IN / OUT jacks
Use to control this projector when combined with Marantz products into a system. Connect the REMOTE CONTROL OUT of the other Marantz product to the REMOTE CONTROL IN of this projector and the REMOTE CONTROL IN of this other Marantz product to the REMOTE CONTROL OUT of this projector.
Note:
Use the included bus control adapter cable to connect this projector to other Marantz products.
13
!3Screw holes for ceiling mount kit
Use to hang the projector from a ceiling. To hang the projector from a ceiling, contact your nearest Marantz Authorized Dealer or Service Center.
9