Marantz Model VP-10S1 manual Selecting an Input signal, Selecting Aspect Mode

Selecting an Input signal

You can select the Input signal from amongst the devices connected to the projector.

Every time the INPUT button on the projector or the remote controller is pressed, the Input signal rotates in the order of COMPONENT 1 ➔ COMPONENT 2 ➔ S-VIDEO ➔ VIDEO ➔ RGB ➔ AUX. The Input signal can also be switched to a specific source by pressing the COMP.1, COMP.2, S-VIDEO, VIDEO, RGB or AUX button.

ENGLISH

ON

POWER
STANDBY
MENU	INPUT
	PATTERN

ENTER

INPUT ASPECT

INPUT1 MODE ASPECT

COMP.1 THEATER FULL

Select an Input signal.

COMP.2	STD	NORMAL
S-VIDEO	DYNA.	ZOOM

VIDEO USER THROUGH

RGB CINEMA INFO

AUX

Selecting Aspect Mode

You can set the aspect ratio of the projected image to any of four modes, using the remote controller.

Every time the ASPECT button on the remote controller is pressed, the aspect mode rotates in the order of Full ➔ Normal ➔ Zoom

➔Through. The aspect ratio can also be switched to a specific mode by pressing the FULL, NORMAL, ZOOM or THROUGH button. And the aspect mode can also be selected from the menu. (☞ pg. 29)

INPUT ASPECT

INPUT1 MODE ASPECT

COMP.1 THEATER FULL

Select an aspect mode.

COMP.2 STD NORMAL

S-VIDEO DYNA. ZOOM

VIDEO USER THROUGH

RGB CINEMA INFO

To set the aspect mode for your screen, see the next page.

21