Marantz Model VP-10S1 manual Positioning the Projected Image, Upward Downward Side view, To right

ENGLISH

Positioning the Projected Image

You can position the projected image on the screen using the “Lens shift” feature in the menu (OSD). (For an explanation of this feature, see “Configuration” ☞ pg. 32.)

First, project an image on the screen. (If you haven’t an Input signal, display the focus pattern.)

ON

1
	2, 3, 4, 5
POWER
STANDBY
MENU	INPUT
	PATTERN
	ENTER

PATT.

1

MENU V-MUTE

2, 3,

4, 5

ENTER

INPUT ASPECT

1.Press the MENU button on the remote controller or projector to display the menu.

2.Select “Config” using the 3 / 4 buttons, then press the 2 button.

3.Select “Lens shift” using the 3 / 4 buttons, then press the 2 button. (If you haven’t an Input signal at this point, display the focus pattern.)

4.Position the projected image vertically on the screen using the 3 / 4 buttons on the remote controller or projector.

Upward

Downward Side view

5.Position the projected image horizontally on the screen using the 1 / 2 buttons on the remote controller or projector.

To right

Top view

To left

18