Marantz Model VP-10S1 manual Error Mode, On Screen Message, No Signal, Replace Lamp, OUT of Range

Page 45

ERROR MODE

WARNING indicator, POWER ON indicator, and STANDBY indicator diagnose error mode of the projector as follows.

	Error mode		Indicators		Possible Cause	Recommendation
		WARNING	POWER ON	STANDBY


	Lamp cover	ON	OFF	Flashing	The lamp cover is not	Close the cover correctly.
					closed properly.

	Lamp	ON	OFF	OFF	The lamp has failed, or	Replace the lamp and
					the lamp is completely	reset lamp life.
					worn out.

	Temperature	Flashing	OFF	Flashing	Projector internal
					temperature is higher
					than the allowed level.	Check if anything is
	Fan	Flashing	OFF	ON	Trouble has occurred	blocking the exhaust vent.
					with the fan.

	Color temperature	ON	OFF	ON	Color temperature	Retry adjustment.
	adjustment				adjustment failed.

	Other	Flashing	OFF	OFF	Internal program error	Shut power OFF and
						ON again.

ENGLISH

ON SCREEN MESSAGE

Use the list below to check the message displayed on the screen.

Message	Meaning	Remedy
NO SIGNAL	No input signal.	Properly connect the cables.
REPLACE LAMP!	The lamp has reached the end of its life.	Replace the lamp and reset lamp life.

OUT OF RANGE	Improper signal feed to the projector.	Adjust resolution, V(Hz) : refresh rate of the
OUT OF RANGE		equipment, referring to the Timing Chart.
		equipment, referring to the Timing Chart.

43

Image 45

Contents Model VP-10S1 User Guide Retain Your Purchase Receipt WarrantyFor U.K. only GarantieLamp Handling Precautions Table of Contents Precautions in Relocation Precautions in USEPrecautions in Installation Precautions in OperationLens Changes Lamp Replacement PrecautionsVorsicht Warnung HeissEnglish Automatic color temperature adjustment FeaturesEasy to install and operate Designed for silence and safetyAccessories Names and Functions of Parts Front and TopProjection Lens IR sensor Terminals Rear and TerminalsBottom Lamp coverRemote Controller Remote Controller Operating Range How to Install InstallationWhen installing on a flat surface When mounting on a ceilingScreen Size and Projection Distance 169 Screen How to calculate projection distanceEnglish Screen Size and Projection Distance 43 ScreenWhen disconnecting cables When making connections be sure toConnecting the AC Power Cable Connecting to Video EquipmentConnecting to a Home Theater System Connecting to an HD-Video, Satellite, Cable Tuner or PCInitial Setting Activating the PowerFocusing and Zooming Upward Downward Side view Positioning the Projected ImageTo right Top viewVertical keystone correction Horizontal keystone correction Keystone CorrectionBasic Operations Shutting Power OFFSelecting an Input signal Selecting Aspect ModeTo set the aspect mode for your screen, see the next When Using a 169 Screen When Using a 43 Screen Menu Structure Menu OperationsHow to Operate Menus Picture Mode and MemoryPicture mode Index Color Temp. Color Temperature Picture AdjustAdjusting Picture Quality ContrastDelay Picture quality can be fine-adjusted from the Fine MenuFine Menu LuminanceMiscellaneous Sub ControlSetting How to Operate the Setting MenuDVI RGB, YPBPR, Ycbcr System How to Operate the System MenuDisplay How to Operate the Display MenuConfiguration How to Operate the Trigger 2 Menu How to Operate the Config MenuReset All TriggerPreset How to Operate the Preset MenuSaving settings in an index Lamp Life and Replacement MaintenanceLamp Life Press the Menu button to clear the message from the screenLamp Unit Replacement Resetting the Lamp Life CounterHow to Replace the Lamp PreparationEnglish Color Temp.Calibration ? Color Temperature AdjustmentLens Cleaning Color Temperature Sensor ProtectionReplacement Parts Optional AccessoriesOptical characteristics SpecificationsGeneral specifications AccessoriesGlossary Timing chartTroubleshooting No Signal Error ModeOn Screen Message Replace LampTop DimensionsFront RearJapan Europe02/2004 ECMf 09AV851310