Marantz Model VP-10S1 manual Sub Control, Miscellaneous

ENGLISH

❖Sub Control

FineMenu		Standard 1
Luminance	Contrast Red	0
Chrominance	Contrast Green	0
Sub Control	Contrast Blue	0
Miscellaneous	Brightness Red	0
	Brightness Green	0
	Brightness Blue	0
	Clamp Position	0
	Clamp Width	0

Contrast Red

: Sets how much red contrast comes out in images.

Contrast Green

: Sets how much green contrast comes out in images.

Contrast Blue

: Sets how much blue contrast comes out in images.

Brightness Red

: Sets how bright red comes out in images.

Brightness Green

: Sets how bright green comes out in images.

Brightness Blue

: Sets how bright blue comes out in images.

Clamp Position

: Sets the clamp position.

Clamp Width

: Sets the clamp width.

Menu item	Adjustment range
Contrast Red	0		255
Contrast Green	0		255
Contrast Blue	0		255
Brightness Red	0		255
Brightness Green	0		255
Brightness Blue	0		255
Clamp Position	-128	127
Clamp Width	-128	127

❖Miscellaneous

FineMenu		Standard 1
Luminance	DCDi	On
Chrominance	FRC	Auto
Sub Control	CCS	Off
Miscellaneous	Sharpness Filter	2

Menu item	Adjustment range
DCDi	On	Off
FRC	Auto	On
CCS	On	Off
Sharpness Filter	0	4

DCDi

: Turns the DCDi feature on/off.

FRC (Frame Rate Conversion)

Auto : Basically disables frame rate conversion, but it is enabled by the vertical frequency of the input signal.

On : Enables frame rate conversion. All input signals are converted to 60 Hz.

CCS (Cross Color Suppression Function)

On : Enables cross color suppression.

Off : Disables cross color suppression. Use this mode for sources that do contain cross colors, such as progressive scanning DVD players.

Sharpness Filter

: Sets the sharpness of DVI and RGB images.

28