Marantz Model VP-10S1 manual Basic Operations, Shutting Power OFF

Page 22

ENGLISH

BASIC OPERATIONS

Activating the Power

1.Connect the included AC power cable. (☞ pg. 15)

2.Set the ON/OFF switch in the on position. The STANDBY indicator will light up.

3.Press the POWER ON button on the remote controller or the POWER button on the projector. The POWER ON indicator on the projector will light up.

		STANDBY	POWER ON
			PATTERN
			PATT.
ON	POWER	MENU	V-MUTE
	STANDBY	MENU	V-MUTE
	MENU	INPUT
		PATTERN
		ENTER
			ENTER

Shutting Power OFF

1.Press the STANDBY button on the remote controller or the POWER button on the projector.

		STANDBY	POWER ON
			PATTERN
			PATT.
ON	POWER	MENU	V-MUTE
	STANDBY MENU	MENU	V-MUTE
		INPUT
		PATTERN
		ENTER
			ENTER

2.The fan will continue running for about 1 min to internally cool the projector. In the meantime, the POWER ON indicator on the projector will flash blue and the buttons on the projector and the remote controller will be irresponsive to touch. After the fan stops, the POWER ON indicator stops flashing and the STANDBY indicator lights up to indicate that the projector is on standby.

3.Set the ON/OFF switch in the off position. The STANDBY indicator will go out.

Note :

•Until the projector goes on standby, the cooling fan turns to internally cool the project. Do not unplug the AC power cable until you set the ON/OFF switch in the off position in the above procedure. Shutting off power prematurely can damage the projector.

•While the projector is on standby, power is not completely off. If not planning to use the projector for a long period of time, set the ON/OFF switch in the off position and unplug the AC power cable from its electrical outlet.

•If the WARNING indicator lights up or flashes red, check the fan has stopped, set the ON/OFF switch in the off position and unplug the AC power cable from its electrical outlet.

•Immediately after shutting off the power, power cannot be reactivated from either the POWER button on the projector or the POWER ON button on the remote controller. Check the projector is on standby and then press the POWER button on the

projector or the POWER ON button on the remote controller.

20

Image 22

Contents Model VP-10S1 User Guide For U.K. only WarrantyRetain Your Purchase Receipt GarantieLamp Handling Precautions Table of Contents Precautions in Installation Precautions in USEPrecautions in Relocation Precautions in OperationVorsicht Lamp Replacement PrecautionsLens Changes Warnung HeissEnglish Easy to install and operate FeaturesAutomatic color temperature adjustment Designed for silence and safetyAccessories Front and Top Names and Functions of PartsProjection Lens IR sensor Bottom Rear and TerminalsTerminals Lamp coverRemote Controller Remote Controller Operating Range When installing on a flat surface InstallationHow to Install When mounting on a ceilingHow to calculate projection distance Screen Size and Projection Distance 169 ScreenScreen Size and Projection Distance 43 Screen EnglishConnecting the AC Power Cable When making connections be sure toWhen disconnecting cables Connecting to Video EquipmentConnecting to an HD-Video, Satellite, Cable Tuner or PC Connecting to a Home Theater SystemActivating the Power Initial SettingFocusing and Zooming To right Positioning the Projected ImageUpward Downward Side view Top viewKeystone Correction Vertical keystone correction Horizontal keystone correctionShutting Power OFF Basic OperationsSelecting Aspect Mode Selecting an Input signalTo set the aspect mode for your screen, see the next When Using a 169 Screen When Using a 43 Screen Menu Operations Menu StructurePicture Mode and Memory How to Operate MenusPicture mode Index Adjusting Picture Quality Picture AdjustColor Temp. Color Temperature ContrastFine Menu Picture quality can be fine-adjusted from the Fine MenuDelay LuminanceSub Control MiscellaneousHow to Operate the Setting Menu SettingDVI RGB, YPBPR, Ycbcr How to Operate the System Menu SystemHow to Operate the Display Menu DisplayConfiguration Reset All How to Operate the Config MenuHow to Operate the Trigger 2 Menu TriggerHow to Operate the Preset Menu PresetSaving settings in an index Lamp Life MaintenanceLamp Life and Replacement Press the Menu button to clear the message from the screenHow to Replace the Lamp Resetting the Lamp Life CounterLamp Unit Replacement PreparationEnglish Color Temperature Adjustment Color Temp.Calibration ?Replacement Parts Color Temperature Sensor ProtectionLens Cleaning Optional AccessoriesGeneral specifications SpecificationsOptical characteristics AccessoriesTiming chart GlossaryTroubleshooting On Screen Message Error ModeNo Signal Replace LampFront DimensionsTop RearEurope Japan02/2004 ECMf 09AV851310