Marantz Model VP-10S1 Connections, When making connections be sure to, When disconnecting cables

Page 17

CONNECTIONS

❖When making connections be sure to:

•Turn off the projector and any connected equipment before making any connections.

•Use the proper cables for each connection. See the instruction manual of each connected device.

•Securely insert the plug into the jack to connect cables. Loose connections can lead to trouble.

❖When disconnecting cables:

•Grab the plug and not the cable itself. Pulling on the cable can damage the cable and cause incomplete connections later on.

Connecting the AC Power Cable

Connect the included AC power cable to the AC IN socket on the projector rear and plug the other end into an electrical outlet (100-120/220-240V AC, 50/60 Hz, 5 A or more).

Keep the ON/OFF switch in the off position until all devices have been connected.

Note :

• Check the AC power cable is securely inserted into the AC IN socket on the projector rear.

•Before connecting the AC power cable, attach a grounding wire to the plug end. Before detaching the grounding wire, always unplug the AC power cable from its electrical outlet.

Connecting to Video Equipment

This projector can connect to VCR, DVD player and other type of video equipment.

Connecting a video equipment to the S-VIDEO IN and VIDEO IN jacks

1.Connect one end of an S-video cable to the S-VIDEO IN jack on the projector rear. Similarly, connect one end of a video cable to the VIDEO IN jack on the projector rear.

2.Connect the other end of the S-video cable to the S-video output jack on the VCR. Similarly, connect the other end of the video cable to the video output jack on the VCR.

Connecting a DVD player to the COMPONENT VIDEO IN 1 or 2 jack (Devices can be connected to both terminals at the same time.)

1.Connect the pin-jacks on one end of the component video cable to the COMPONENT VIDEO IN 1 or 2 jack on the projector rear.

2.Connect the pin-jacks on the other end of the cable to the corresponding jacks on the DVD player.

VIDEO IN S-VIDEO IN COMPONENTVIDEO IN 1

COMPONENTVIDEO IN 2

Y

PB/CB PR/CR

Y

PB/CB

PR/CR

ENGLISH

RGB IN

DVI-D IN

REMOTE

TRIG. LIGHT

RS-232C

IN

1

INT.

EXT.

OFF ON

 

OUT

2

COMPONENT VIDEO OUT

Component cable

(commercially available)

COMPONENT VIDEO OUT

Component cable

(commercially available)

S-VIDEO OUT S-video cable (commercially available)

VIDEO OUT

Video cable (commercially available)

DVD

DVD

VCR

15

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Model VP-10S1 User Guide Retain Your Purchase Receipt WarrantyFor U.K. only GarantieLamp Handling Precautions Table of Contents Precautions in Relocation Precautions in USEPrecautions in Installation Precautions in OperationLens Changes Lamp Replacement PrecautionsVorsicht Warnung HeissEnglish Automatic color temperature adjustment FeaturesEasy to install and operate Designed for silence and safetyAccessories Projection Lens IR sensor Names and Functions of PartsFront and Top Terminals Rear and TerminalsBottom Lamp coverRemote Controller Remote Controller Operating Range How to Install InstallationWhen installing on a flat surface When mounting on a ceilingScreen Size and Projection Distance 169 Screen How to calculate projection distanceEnglish Screen Size and Projection Distance 43 ScreenWhen disconnecting cables When making connections be sure toConnecting the AC Power Cable Connecting to Video EquipmentConnecting to a Home Theater System Connecting to an HD-Video, Satellite, Cable Tuner or PCFocusing and Zooming Initial SettingActivating the Power Upward Downward Side view Positioning the Projected ImageTo right Top viewVertical keystone correction Horizontal keystone correction Keystone CorrectionBasic Operations Shutting Power OFFTo set the aspect mode for your screen, see the next Selecting an Input signalSelecting Aspect Mode When Using a 169 Screen When Using a 43 Screen Menu Structure Menu OperationsPicture mode Index How to Operate MenusPicture Mode and Memory Color Temp. Color Temperature Picture AdjustAdjusting Picture Quality ContrastDelay Picture quality can be fine-adjusted from the Fine MenuFine Menu LuminanceMiscellaneous Sub ControlDVI RGB, YPBPR, Ycbcr SettingHow to Operate the Setting Menu System How to Operate the System MenuDisplay How to Operate the Display MenuConfiguration How to Operate the Trigger 2 Menu How to Operate the Config MenuReset All TriggerSaving settings in an index PresetHow to Operate the Preset Menu Lamp Life and Replacement MaintenanceLamp Life Press the Menu button to clear the message from the screenLamp Unit Replacement Resetting the Lamp Life CounterHow to Replace the Lamp PreparationEnglish Color Temp.Calibration ? Color Temperature AdjustmentLens Cleaning Color Temperature Sensor ProtectionReplacement Parts Optional AccessoriesOptical characteristics SpecificationsGeneral specifications AccessoriesGlossary Timing chartTroubleshooting No Signal Error ModeOn Screen Message Replace LampTop DimensionsFront Rear02/2004 ECMf 09AV851310 JapanEurope
Top Page Image Contents