Marantz Model VP-10S1 manual Connecting to an HD-Video, Satellite, Cable Tuner or PC

ENGLISH

Connecting to an HD-Video, Satellite, Cable Tuner or PC

You can connect this projector to an HD-Video or PC using the RGB IN jack as well as to a satellite, cable tuner or PC using the DVI-D input jack.

1.Connect one end of an RGB cable (or DVI-D cable) to the RGB IN jack (or DVI-D IN jack) on the projector rear.

2.Connect the other end of the cable to the RGB output jack of the HD-Video or PC (or the DVI-D output jack of the satellite, cable tuner or PC).

Note : To project images from a device connected to the DVI-D jack, do as follows. The images can be distorted if you do not follow the procedure. For details on DVI-D jack of the connected device, see the instruction manual of that device.

1.Turn on power to the projector. (☞ pg. 17)

2.Set the Input signal of the projector to AUX (DVI-D IN). (☞ pg. 21)

3.Turn on power to the device (i.e. DVD player) connected to the projector’s DVI-D jack.

RGB (D-Sub monitor) cable

(commercially available)RGB OUT or

DVI-D out

VIDEO IN S-VIDEO IN COMPONENTVIDEO IN 1			COMPONENTVIDEO IN 2
	Y	PB/CB PR/CR	Y	PB/CB	PR/CR
				REMOTE		TRIG. LIGHT
RGB IN	DVI-D IN	RS-232C		INT. EXT.	IN	1
						OFF ON
					OUT	2

DVI-D cable (commercially available)

HD-Video / Satellite

/ Cable Tuner

Monitor output

RGB OUT

or

DVI-D out

IBM VGA or

Compatible PC

Connecting to a Home Theater System

You can control an entire home theater system using a PC and Marantz receiver equipment.

To install the below system, contact your nearest Marantz Authorized Dealer or Service Center.

VIDEO IN S-VIDEO IN COMPONENTVIDEO IN 1			COMPONENTVIDEO IN 2
	Y	PB/CB PR/CR	Y	PB/CB	PR/CR
							Screen
				REMOTE		TRIG.	LIGHT
RGB IN	DVI-D IN	RS-232C		INT. EXT.	IN	1
							OFF ON
					OUT	2
RS-232C cable
	(straight type,
commercially available)
	RS-232C
							3.5mm Mini Plug (Mono)
							(commercially available)
				Control Adapter cable
				(commercially available)
							REMOTE CONTROL IN
External Controller							REMOTE CONTROL OUT
		Control Adapter cable					Receiver equipment
			(supplied)
16