Marantz Model VP-10S1 manual Picture Adjust, Contrast, Color Temp. Color Temperature

ENGLISH

Picture Adjust

You can adjust picture quality to your liking in each of the picture modes and save those adjustments in memory. This projector makes 3 memory indexes (1, 2 and 3) available for each picture mode.

❖For a video signal input, the following adjustments can be made.

Menu		Standard 1
Picture Adjust	Contrast	50
Setting	Brightness	44
System	Color	58
Display	Sharpness	7
Config	Tint	0
Trigger 2	Noise Reduction	0
Preset	Color Temp.	3
	Fine Menu

Menu item	Adjustment range
Contrast	0				100
	Weak				Strong
Brightness	0				100
	Dark				Bright
Color	0				100
	Light				Deep
Sharpness	0		31
	Soft				Sharp
Tint	R50				G50
	Purple				Green
Noise Reduction	0			63
	Weak				Strong
Color Temp. (Color Temperature)	1	2 3	4 5
	Red				Blue

Note:

•Some menu items cannot be adjusted depending on the input signal.

•If default is selected as the index, picture quality cannot be adjusted. To adjust picture quality, select an index from 1 to 3. See “Preset” (☞ pg. 34)

❖Contrast

Contrast50

❖Color Temp. (Color Temperature)

1 : Red comes out strong. Color temperature is about 5250 K.

2 : Red is mildly strong. Color temperature is about 5800 K.

3 : Normal. Color temperature is about 6500 K.

4 : Blue is mildly strong. Color temperature is about 7500 K.

5 : Blue comes out strong. Color temperature is about 9300 K.

Color Temp. 2

❖Adjusting Picture Quality

1.Select the desired menu item and press the 2 button. An adjustment bar appears on the screen.

2.Use the 1 and 2 buttons to adjust the item.

3.Press the 3 button to enter the setting and return to menu item selection.

MENU	V-MUTE
3.	3.
PATTERN INPUT
ENTER
	ENTER
1, 2	1, 2
INPUT	ASPECT

26