Marantz Model VP-10S1 manual Remote Controller Operating Range

Page 13

™3CINEMA button

Pressing the button one time displays the currently selected cinema mode. Pressing the button after that switches the 2-3 pull-down feature between Auto/Off.

™4USER button (pg. 25)

Selects the user mode.

The user mode is for enjoying images at a user-selected gamma curve.

Every time the button is pressed, the selection rotates in the order of User 1 User 2 User 3.

™5DYNA. button (pg. 25)

Selects the dynamic mode.

The dynamic mode is for enjoying visually dynamic images. Every time the button is pressed, the selection rotates in the order of Dynamic 1 Dynamic 2 Dynamic 3 Default.

Remote Controller Operating Range

Use the remote controller within 5 m of the projector. The projector may not respond to the remote controller if the remote controller is pointed in a different direction from the projector, if there are objects between the remote controller and projector or if strong light shines on the projector’s IR sensor.

 

Remote

 

 

Controller

 

 

5m

 

 

60

Remote

 

 

Remote

 

Controller

Controller

60

5m

5m

60

 

 

VP-10S1

 

How to Load Batteries into the Remote Controller

1. Detach the battery case cover from the back of the remote

 

controller.

ENGLISH

Battery case cover

 

2. Insert two AA batteries with their +/– poles matching the indications inside the battery compartment.

AA batteries

3.Reattach the battery case cover as before.

Battery case cover

Remote

Controller

5m 60

Remote

Controller

60 5m

VP-10S1

Remote

Controller

5m

60

CAUTION

– The available battery types are limited: manganese dry cell

and alkaline dry cell.

– Do not mix different battery types.

– Do not mix old and new batteries.

– Only batteries of the same type are to be used.

– Remove exhausted batteries from the Remote Controller.

– Do not attempt to recharge non-rechargeable batteries.

– Do not use rechargeable batteries.

– Batteries are to be inserted with the correct polarity.

– The supply terminals are not to be short-circuited.

– Never throw batteries in a fire or attempt to open up its outer

casing.

VP-10S1

– If the user does not intend to use the Remote Controller for

a long time, remove the batteries.

– Keep away from heat.

– Do not be subjected to strong shock.

– Do not be subjected to moisture. If the unit gets moistured,

wipe it off immediately.

– The Remote Controller operation may not function if the

projector’s IR sensors are exposed to direct sun light or

strong artificial light, or if there is an obstacle between the

IR sensors and the Remote Controller.

11

Image 13
Contents Model VP-10S1 User Guide Retain Your Purchase Receipt WarrantyFor U.K. only GarantieLamp Handling Precautions Table of Contents Precautions in Relocation Precautions in USEPrecautions in Installation Precautions in OperationLens Changes Lamp Replacement PrecautionsVorsicht Warnung HeissEnglish Automatic color temperature adjustment FeaturesEasy to install and operate Designed for silence and safetyAccessories Front and Top Names and Functions of PartsProjection Lens IR sensor Terminals Rear and TerminalsBottom Lamp coverRemote Controller Remote Controller Operating Range How to Install InstallationWhen installing on a flat surface When mounting on a ceilingScreen Size and Projection Distance 169 Screen How to calculate projection distanceEnglish Screen Size and Projection Distance 43 ScreenWhen disconnecting cables When making connections be sure toConnecting the AC Power Cable Connecting to Video EquipmentConnecting to a Home Theater System Connecting to an HD-Video, Satellite, Cable Tuner or PCActivating the Power Initial SettingFocusing and Zooming Upward Downward Side view Positioning the Projected ImageTo right Top viewVertical keystone correction Horizontal keystone correction Keystone CorrectionBasic Operations Shutting Power OFFSelecting Aspect Mode Selecting an Input signalTo set the aspect mode for your screen, see the next When Using a 169 Screen When Using a 43 Screen Menu Structure Menu OperationsPicture Mode and Memory How to Operate MenusPicture mode Index Color Temp. Color Temperature Picture AdjustAdjusting Picture Quality ContrastDelay Picture quality can be fine-adjusted from the Fine MenuFine Menu LuminanceMiscellaneous Sub ControlHow to Operate the Setting Menu SettingDVI RGB, YPBPR, Ycbcr System How to Operate the System MenuDisplay How to Operate the Display MenuConfiguration How to Operate the Trigger 2 Menu How to Operate the Config MenuReset All TriggerHow to Operate the Preset Menu PresetSaving settings in an index Lamp Life and Replacement MaintenanceLamp Life Press the Menu button to clear the message from the screenLamp Unit Replacement Resetting the Lamp Life CounterHow to Replace the Lamp PreparationEnglish Color Temp.Calibration ? Color Temperature AdjustmentLens Cleaning Color Temperature Sensor ProtectionReplacement Parts Optional AccessoriesOptical characteristics SpecificationsGeneral specifications AccessoriesGlossary Timing chartTroubleshooting No Signal Error ModeOn Screen Message Replace LampTop DimensionsFront RearEurope Japan02/2004 ECMf 09AV851310