Texas Instruments 28xxx, TMS320x28xx manual Important Notice

Page 119

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.

TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed.

TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions.

Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.

TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications.

TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer'srisk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.

TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements.

Following are URLs where you can obtain information on other Texas Instruments products and application solutions:

Products

 

Applications

 

Amplifiers

amplifier.ti.com

Audio

www.ti.com/audio

Data Converters

dataconverter.ti.com

Automotive

www.ti.com/automotive

DSP

dsp.ti.com

Broadband

www.ti.com/broadband

Interface

interface.ti.com

Digital Control

www.ti.com/digitalcontrol

Logic

logic.ti.com

Military

www.ti.com/military

Power Mgmt

power.ti.com

Optical Networking

www.ti.com/opticalnetwork

Microcontrollers

microcontroller.ti.com

Security

www.ti.com/security

RFID

www.ti-rfid.com

Telephony

www.ti.com/telephony

Low Power

www.ti.com/lpw

Video & Imaging

www.ti.com/video

Wireless

 

 

 

 

 

Wireless

www.ti.com/wireless

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265

Copyright © 2007, Texas Instruments Incorporated

Page 118 Page 119
Image 119
Page 118 Page 119
Contents Reference Guide Submit Documentation Feedback Contents Controlling a 3-Phase Interleaved DC/DC Converter List of Figures Event-Trigger Socb Pulse Generator Simplified ePWM Module List of Tables Submit Documentation Feedback Peripheral Guides Related Documentation From Texas InstrumentsData Manuals CPU Users GuidesApplication Reports Tools GuidesTMS320C28x, C28x are trademarks of Texas Instruments TrademarksSubmit Documentation Feedback Introduction Submodule Overview IntroductionMultiple ePWM Modules ∙ Peripheral Bus ∙ PWM output signals EPWMxA and EPWMxB∙ Trip-zone signals TZ1 to TZ6 ∙ ADC start-of-conversion signals EPWMxSOCA and EPWMxSOCBRegister Mapping EPWM Submodules and Critical Internal Signal InterconnectsCounter-Compare Submodule Registers Offset Size NameDescription Time-Base Submodule RegistersEPWM Submodules Overview Submodule Configuration ParametersSubmodule Configuration Parameter or Option Tbup Example 2-1. Constant Definitions Used in the Code ExamplesChpenable Purpose of the Time-Base Submodule Time-Base TB SubmoduleRegister Controlling and Monitoring the Time-base SubmoduleTime-Base Submodule Registers ∙ Down-Count Mode Key Time-Base Signals∙ Up-Down-Count Mode ∙ Up-Count Mode∙ Active Register ∙ Time-Base Period Shadow Mode∙ Time-Base Period Immediate Load Mode Time-Base Period Shadow RegisterTime-Base Counter Synchronization Scheme Time-Base Counter SynchronizationEPWM11SYNCO EPWM11SYNCI∙ Software Forced Synchronization Pulse ∙ EPWMxSYNCI Synchronization Input PulseTime-base Counter Modes and Timing Waveforms Phase Locking the Time-Base Clocks of Multiple ePWM ModulesTime-Base Down-Count Mode Waveforms 11. Counter-Compare Submodule Counter-Compare CC SubmoduleRegister Name Address Offset Purpose of the Counter-Compare SubmoduleControlling and Monitoring the Counter-Compare Submodule Counter-Compare Submodule Registers∙ Immediate Load Mode Count Mode Timing WaveformsCounter-Compare Submodule Key Signals ∙ Shadow ModeCTR=CMPB CTR=CMPACTR = Cmpb Action-Qualifier Submodule Registers Action-Qualifier AQ SubmodulePurpose of the Action-Qualifier Submodule ∙ Toggle Action-Qualifier Submodule Possible Input Events∙ Set High ∙ Clear LowTB Counter equals Actions Action-Qualifier Event Priority Action-Qualifier Event Priority for Up-Down-Count ModeAction-Qualifier Event Priority for Up-Count Mode 10. Action-Qualifier Event Priority for Down-Count ModeWhen using up-count mode to generate an asymmetric PWM Waveforms for Common ConfigurationsUse up-down-count mode to generate a symmetric PWM Use up-down-count mode to generate an asymmetric PWM20. Up-Down-Count Mode Symmetrical Waveform Tbctr Example 2-2. Code Sample for FigureValue EPWMxA EPWMxB Tbclk = Sysclkout Example 2-3. Code Sample for FigureEdgePosA Example 2-4. Code Sample for FigureExample 2-5. Code Sample for Figure Tbctr Example 2-6. Code Sample for FigureEPWMxA EPWMxB Example 2-7. Code Sample for Figure12. Dead-Band Generator Submodule Registers Dead-Band Generator DB SubmodulePurpose of the Dead-Band Submodule Controlling and Monitoring the Dead-Band Submodule∙ Polarity Control ∙ Output Mode ControlOperational Highlights for the Dead-Band Submodule ∙ Input Source Selection13. Classical Dead-Band Operating Modes Mode Description29. Dead-Band Waveforms for Typical Cases 0% Duty 100% FED = Dbfed × Ttbclk RED = Dbred × Ttbclk Dead-Band Delay in μSOperational Highlights for the PWM-Chopper Submodule PWM-Chopper PC SubmodulePurpose of the PWM-Chopper Submodule Controlling the PWM-Chopper Submodule31. PWM-Chopper Submodule Operational Details WaveformsOSHTWTHz One-Shot Pulse16. Possible Pulse Width Values for Sysclkout = 100 MHz Period Duty Cycle ControlPurpose of the Trip-Zone Submodule Trip-Zone TZ Submodule∙ Cycle-by-Cycle CBC Controlling and Monitoring the Trip-Zone SubmoduleOperational Highlights for the Trip-Zone Submodule 17. Trip-Zone Submodule RegistersScenario B Example 2-8. Trip-Zone Configurations18. Possible Actions On a Trip Event Scenario aGenerating Trip Event Interrupts 36. Trip-Zone Submodule Mode Control Logic37. Trip-Zone Submodule Interrupt Logic Event-Trigger ET SubmoduleOperational Overview of the Event-Trigger Submodule CTR=CMPB CTRD=CMPB 19. Event-Trigger Submodule Registers41. Event-Trigger Interrupt Generator 42. Event-Trigger Soca Pulse Generator Submit Documentation Feedback Controlling Multiple Buck Converters With Independent Applications to Power TopologiesOverview of Multiple Modules Key Configuration CapabilitiesCTR=0 EPWM1B CTR=CMPB Control of Four Buck Stages. Here FPWM1≠ FPWM2≠ FPWM3≠ FPWM4 Buck Waveforms for -3Note Only three bucks shown here 500 Example 3-1. Configuration for Example in FigureControl of Four Buck Stages. Note FPWM2 = N x FPWM1 Controlling Multiple Buck Converters With Same FrequenciesBuck Waveforms for -5Note FPWM2 = FPWM1 Example 3-2. Code Snippet for Configuration in Figure Control of Two Half-H Bridge Stages FPWM2 = N x FPWM1 Controlling Multiple Half H-Bridge HHB ConvertersHalf-H Bridge Waveforms for -7Note Here FPWM2 = FPWM1 Example 3-3. Code Snippet for Configuration in Figure Controlling Dual 3-Phase Inverters for Motors ACI and PmsmEPWM1A 10 -Phase Inverter Waveforms for -9Only One Inverter Shown Example 3-4. Code Snippet for Configuration in Figure 11. Configuring Two PWM Modules for Phase Control Controlling a 3-Phase Interleaved DC/DC Converter Controlling a 3-Phase Interleaved DC/DC Converter13. Control of a 3-Phase Interleaved DC/DC Converter 14 -Phase Interleaved DC/DC Converter Waveforms for Figure Example 3-5. Code Snippet for Configuration in Figure 15. Controlling a Full-H Bridge Stage FPWM2 = FPWM1 16. ZVS Full-H Bridge Waveforms Example 3-6. Code Snippet for Configuration in Figure Submit Documentation Feedback Trip-Zone Submodule Control and Status Registers Proper Interrupt Initialization ProcedurePWM-Chopper Submodule Control Register Time-Base Counter Register Tbctr Field Descriptions Time-Base Phase Register Tbphs Field DescriptionsTime-Base Submodule Registers Time-Base Period Register Tbprd Field DescriptionsBit Field Value Description Time-Base Control Register Tbctl Field DescriptionsSoftware Forced Synchronization Pulse Bit Field Counter-Compare Submodule RegistersTime-Base Status Register Tbsts Field Descriptions Bits Name Description Counter-Compare a Register Cmpa Field DescriptionsCounter-Compare B Register Cmpb Field Descriptions Counter-Compare Control Register Cmpctl Field Descriptions Action-Qualifier Submodule RegistersCBD CBD CBU CAD CAU PRD ZROBits Name 10. Action-Qualifier Output B Control Register Aqctlb Csfb Csfa Rldcsf Otsfb Actsfb Otsfa ActsfaRldcsf Inmode Polsel Outmode Dead-Band Submodule RegistersCsfb Inmode Reserved PWM-Chopper Submodule Control Register16. PWM-Chopper Control Register Pcctl Bit Descriptions Name Value DescriptionChpduty Trip-Zone Submodule Control and Status RegistersPWM-Chopper Control Register Pcctl Bit Descriptions CBC6 OSHT6 OSHT5 OSHT4 OSHT3 OSHT2 OSHT1CBC6 CBC5 CBC4 CBC3 CBC2 CBC1 OSHT6OST CBC 18. Trip-Zone Control Register Tzctl Field DescriptionsTZB TZA TZBOST CBC INT 20. Trip-Zone Flag Register Tzflg Field Descriptions22. Trip-Zone Force Register Tzfrc Field Descriptions Event-Trigger Submodule Registers21. Trip-Zone Clear Register Tzclr Field Descriptions 23. Event-Trigger Selection Register Etsel Name Description 24. Event-Trigger Prescale Register Etps Field DescriptionsSocb Soca 24. Event-Trigger Prescale Register Etps Field DescriptionsSocb 25. Event-Trigger Flag Register Etflg Field Descriptions26. Event-Trigger Clear Register Etclr Field Descriptions 27. Event-Trigger Force Register Etfrc Field Descriptions Proper Interrupt Initialization Procedure 116 Location Modifications, Additions, and Deletions Table A-1. Changes for Revision DAppendix a Important Notice
Top Page Image Contents