Sharp MX-C300PE, MX-C300PL Mail Status and E-MAIL Alert Settings, Information Setup, Smtp Setup

WEB FUNCTIONS IN THE MACHINE

Interface settings

Item	Settings	Description
I/O Timeout	1- 60 - 999 (sec)	During reception of a print job, if remaining data is not received
		after the time set here elapses, the port connection is broken and
		the next print job is begun.
Emulation Switching	Auto*,	Select the printer language. When [Auto] is selected, the
	PostScript, PCL	language is automatically selected from the data sent to the
		printer. Unless errors occur frequently, do not change the setting
		from [Auto] to another setting.
Port Switching Method	Switch at End	Select the method for switching network ports.
	of Job, Switch
	after I/O Timeout

E-MAIL STATUS AND E-MAIL ALERT SETTINGS

These functions send information on machine use (print count, etc.) and error conditions (paper misfeed, out of paper, out of toner, etc.) via e-mail to the administrator of the machine or the dealer.

INFORMATION SETUP

Machine identification information for the status and alert e-mail functions is configured in the "Information Setup" screen. The entered information will be included in status and alert e-mail messages.

1 Click [Information] in the menu frame.

The "Information Setup" screen will appear.

2

3

Enter the machine information.

Click [Submit] to store the entered information.

SMTP SETUP

The Status and alert e-mail functions use SMTP (Simple Mail Transport Protocol) to send e-mail. The following procedure is used to set up the e-mail environment. This must be done by the system administrator or other person familiar with the network.

1 Click [Services] in the menu frame.

The "Services Setup" screen will appear.

2

3

4

Click [SMTP].

Enter the information required to set up the e-mail environment.

Click [Submit] to store the entered information.

104