Sharp MX-C300PE Loading the bypass tray, Open the bypass tray, Open out the bypass tray extension

BEFORE USING THE MACHINE

Loading the bypass tray

To feed an envelope, first press down the fusing unit release levers (2 places) to release the pressure, and then follow the steps below.

1 Open the bypass tray.

Open out the bypass tray extension.

2 Push the centre of the pressure plate down until it locks into place.

3 Set the paper guides to the paper width.

4 Insert the paper (print face down) all the way into the bypass tray.

To prevent a misfeed, verify once more that the paper guides are adjusted to the width of the paper.

Warning

After feeding an envelope, be sure to press up and return the fusing unit release levers (2 places) to their original positions.

Note	If you loaded paper into the bypass tray, press the [SPECIAL FUNCTION] key (	) and select "Paper Select" to
	select the bypass tray.

17