Sharp MX-C300PL manual Using the System Settings, Key, Setting that has a checkbox, go to step

SYSTEM SETTINGS

USING THE SYSTEM SETTINGS

1	Press the [SPECIAL FUNCTION] key ( ).
2	Select "System Settings" with the [ ] or [	] key and press the [OK] key.
3	Enter the administrator password with the numeric keys.

•" " appears for each digit that you enter.

•The mode selection screen appears.

4 Select the desired mode with the [ ] or [ ] key.

5	Press the [OK] key.
6	Select the desired setting with the [ ] or [ ] key.
7	Press the [OK] key and follow the instructions in the setting screen.
	Several settings will have checkboxes in front of them. To enable a function (make a checkmark appear), press
	the [OK] key. To disable the setting, press the [OK] once again to remove the checkmark. To configure a
	setting that has a checkbox, go to step 8.
8	To use another setting for the same mode, select the desired setting with the [ ] or
	[ ] key.
	To use a setting for a different mode, press the [BACK] key ( ) and select the desired mode. To exit the
	system settings, press the [HOME] key (	).

87