Sharp MX-C300PE, MX-C300PL manual Disable Auto Key Repeat, Disable Paper Size Set, Toner Save Mode

SYSTEM SETTINGS

Disable Auto Key Repeat

This setting is used to stop a setting from changing continuously when the [ ] or [ ] key is held down, such as selecting a menu item (auto key repeat will not operate). When this setting is enabled, a key must be pressed repeatedly instead of holding it down.

Auto key repeat is initially set to operate (factory default setting).

Disable Paper Size Set

This setting is used to disable "Paper Size Set" in the special functions menu. When disabled, "Paper Size Set" cannot be used when the [Special Function] key () is pressed, which prevents users other than the administrator from easily changing the paper size setting.

"Disable Paper Size Set" is initially disabled (factory default setting).

Enter Auto Power Shut-Off after the Remote Job

When the machine completes a print job received from the PC, the machine immediately returns to the Auto Power Shut-Off mode.

Toner Save Mode

You can reduce the amount of toner used for printing.

Toner Save Mode is only effective when the Note machine's printer driver is not used. When

the printer driver is used, the printer driver setting takes precedence.

This function may not operate in some applications and operating systems.

Energy Save

These settings are used to configure energy saving settings. To access one of these settings, select "Energy Save" in the mode selection screen, and select the desired setting in the energy save screen, and then press the [OK] key.

List Print

This is used to print lists and reports that are only for use by the administrator of the machine.

Select the [List Print] to configure the settings.

•User Info. Print

The user name, user number, paper used, paper limits, and function permission settings can be printed for each user.

Auto Power Shut-Off Timer

This setting is used to set the duration of time until auto power shut-off mode activates when the operation panel is not used. Using this function helps conserve energy, preserve natural resources, and reduce environmental pollution.

"1 min.", "3 min.", "5 min.", "10 min.", "15 min.", "30 min.", "45 min." or "60 min." can be selected for the duration of time. Select a setting that suits your work conditions.

Preheat Mode

This setting is used to set the duration of time until preheat mode, which automatically lowers the fusing unit temperature, activates when the operation panel is not used. Using this function helps conserve energy, preserve natural resources, and reduce environmental pollution. "1 min.", "3 min.", "5 min.", "10 min.",

"15 min.", "30 min.", "45 min." or "60 min." can be selected for the duration of time. Select a setting that suits your work conditions.

Colour Adjust.

This machine provides the colour adjustment ways as shown below.

Easy Calibration and Tone Adjustments

The machine has two colour adjustment functions. Use the appropriate function depending on the situation.

•Easy Calibration

Use to fit the grey balance. This function implements a test page print out.

•Tone Adjustments

Use to adjust the tone density of each colour. This function does not implement a test page print out.

92