Sharp AL-2060 appendix Daylight Saving Time Setting, 5DAY Light Saving

Page 29

INITIAL SETTINGS

Daylight Saving Time Setting

Enable this setting to have the internal clock automatically move forward and backward at the beginning and end of Daylight Saving Time. The clock will move forward and backward as follows:

The last Sunday in March: 1:00 A.M. 2:00 A.M.

The last Sunday in October: 1:00 A.M. 0:00 A.M.

	Note	If a transmission is in progress when the clock adjustment time for daylight savings time arrives, the clock will not
	Note	be adjusted until the transmission ends.
		be adjusted until the transmission ends.

Follow these steps to enable Daylight Saving Time.

1 Press the [MENU] key.

1,2,3,

1,2,3,

SP. FUNC

5 Press the [OK] key.
1,2,3,	2
1,2,3,
SP. FUNC

2 Press the [] key () or [] key () until "2:ENTRY MODE" appears, and then press the [OK] key.

Selection

"2:ENTRY MODE"

3 Press the [] key () or [] key () until "5:DAY LIGHT SAVING" appears, and then press the [OK] key.

Selection

"5:DAY LIGHT SAVING"

4 Press the [] key () or [] key () to select "1:ON" or "2:OFF".

	Select "1:ON" to enable
	the function.
	Select "2:OFF" to disable
1,2,3,	the function.
1,2,3,
SP. FUNC

6 Press the [MENU] key.

Press the [MENU] key to exit.

1,2,3,

1,2,3,

SP. FUNC

25

Image 29

Contents AL-2060 Telecommunication Line cable Important safety information Page Table of Contents Appendix Quick Reference Guide Selecting the transmission mode p.26Sending a fax Dialing methodsStoring a fax job while another job is in progress Selecting the reception modeSending a fax to multiple destinations Broadcasting p.69 Set the default resolution for fax transmission Cancel a timer transmission jobList of FAX Functions Set the date and time in the machineSelect the condition for printing reports on received faxes Enable the polling security functionEnable the remote reception function Set this function for pbx setting Set the volume of the ringerSEC Select 12-hour or 24-hour format for the time set MachinePerform polling transmission repeatedly Time Perform polling transmission oncePoll another fax machine Sequentially poll multiple fax machinesPress the Mode Select key to select fax mode Selecting Settings for the FunctionSelect a setting or enter information Press the Menu keyFor other countries Connecting the Telephone Line CordConnections Online Manual on the CD-ROM Connecting Other DevicesFinal Preparations Following illustration shows the part names of the AL-2060 Part NamesPress this key to adjust the contrast before sending faxes Press this key to select the mode of receptionPress this key to switch between upper and lower case Shows various messages during fax operation and programmingThis lights up when the power save function is activated This lights up when an original is placed in the RspfPress this key to configure a user program Adjusting the Beep Volume Using the Arrow Keys4USER Program Adjusting the Ringing Volume18RINGER Volume Selections are as 17BEEP LengthFollows 13SECPress the key or key to set the alarm volume 19BEEPER VolumeTo turn off the alarm, select 1OFF Press the OK key Press the Menu keyHOW to Enter Characters FAX SetupFollowing characters can be entered with the numeric keys Characters that can be entered3OWN Passcode SET 2ENTRY ModeEntering Your Name and FAX Number When 24-hour format is selected, do not perform this step Setting the Date and Time2DATE&TIME SET Enter Date 2008- 2008/01/021TIME Format Press the Menu key Press the OK key21DATE&TIME Format Press the key or key to select the display order 2DATE FormatPress the key or key to select 1ON or 2OFF Daylight Saving Time Setting5DAY Light Saving Direct transmission the Memory indicator is off Selecting the Transmission ModeMemory transmission the Memory indicator is lit Selecting the Reception Mode Until 4USER Program appears Press the key or keyThen press the OK key # of Rings Auto# of Rings Manual Selecting the Reception Paper SizeWhen the line is busy Setting the Number of Recall Times8RECALL Times Busy Enter the number of recall times 00 toEnter the number of recall times 0 to When a communication error occurs9RECALL Times ERR 10RECALL INT. Busy Setting the Recall IntervalPress the numeric keys to select the recall interval Enter the recall interval 01 toEnter the recall interval 00 to 11RECALL INT. ERR20INDEX Print Setting the Index FunctionUse the following procedure to set the index function Selections are as follows 1STANDARD 2FINE Setting Resolution Priority3RESO. Priority 15FAX Signal RCV Setting UP the Machine for USE with a PC ModemTurning on Remote Reception Using the Remote Reception Function14REMOTE Reception Press a numeric key to enter the Fax Remote Number Setting a Fax Remote Number13FAX Remote Number PBX setting PBX Setting22PBX Setting Press the Clear ALL keyStoring numbers Storing Numbers for Automatic Dialing1FAX Number Enter the fax number with the numeric keysEnter the name of the destination with the numeric keys Press the key or key to select a Chain Dial setting2CLEAR Enter the numbers that you wish to store in the Group Key Storing Numbers Under Group Keys3GROUP KEY Return to to program another Group key Enter a name for the Group Key with the numeric keysTo exit, press the key or key to select 2END Enter the numbers that you wish to delete2END Deleting numbers from Group Keys6A.M. Mode Press the Menu key Using the Machine with AN Answering MachineQuiet Detect Time 1QUIET Detect Time2AUTO Receive Answering Machine BackupIf Quiet Detect Time is not working properly When using the Rspf Size and WeightWhen using the document glass Originals Suitable for FaxingUnsuitable Originals Sending Originals Setting the OriginalPress the # key MarkGently close the Rspf Original Size Optional Transmission Settings1DOC. Glass Size Press the key or key to select the original sizeContrast Resolution1COVER Sheet SET Cover SheetPress the Cover Sheet key Press the OK key 2TX Message SET Message FunctionPress the key or key to select a message If you do not wish to add a message, select 1NO MessageTWO-SIDED Original Transmission Function Press the 2-SIDED TX key until the desired setting appearsPlace the originals in the Rspf Follow these steps to fax a two-sided originalDirect Keypad Dialing Dialing and TransmittingRapid KEY Dialing Speed DialingTo adjust the volume, press the left and key or key Normal Dialing Using the Speaker KEYChain Dialing Dial the fax number of the receiving machinePress the REDIAL/PAUSE key Press the Start key Using the Search KEYRedialing 3MEMORY Status Canceling Deleting a Stored FAX JOBIf the Memory Becomes Full While Scanning AN Original Using MAN. Mode Using Auto ModeUsing A.M. Mode Receiving FaxesSided RX Press the Menu key Optional Reception SettingsTWO-SIDED Reception Paper Receive Reduce16RCV Reduce When Using Manual Sending and Receiving Substitute Reception into Memory Memory2FAX Number Data Transfer0RX Data Transfer Follow these steps to use the fax transfer function 1DATA Transfer1YES Transmission Reservation Adjust the resolution and/or contrast settings if desiredTransmission will begin BroadcastingPress the Broadcast key Press the OK key Press the appropriate Group key. Transmission will begin Broadcasting using a Group keyYou want to poll using one of the following methods 8POLLING ModePolling PollingSerial Polling 9SERIAL Poll ModePolling Transmission Memory Polling Setting up polling transmission7MEMORY Poll Mode Deleting originals from polling memory Adding a original to polling memory1ON Press the key or key To select 1ON11SECURITY Select Fax machines you wantSelect 2CLEAR and press the OK key 4PASSCODE # ModeProgramming/deleting passcode numbers 1TIMER Mode Timer OperationsPress the Menu key Enter the time at which transmission Press the key or key to select 1SETCanceling a Timer Transmission JOB 1ANTI Junk Select Anti Junk FAX5ANTI Junk FAX If you wish to store To store junk fax numbers, use the following procedureAnother fax number Return to stepIf you wish to store another fax number, return to step To clear junk fax numbers, use the following procedureOperation in COPY, PRINTER, SCANNER, and FAX Modes You can print out a list of group dialing numbers Printing OUT ReportsFax numbers designated as Anti Junk Fax numbers Passcode ListPress the Report key Press the OK key Currently activated User Program settingsUse the following procedure to print out reports Press the key or key to select 1ON and press the OK key Activity Report Auto Listing6AUTO Listing 7PRINT Selection Printing Transaction Reports→ Replace the TD cartridge TroubleshootingDisplay Messages Messages and SignalsAudible Signals Specifications Index Transmission mode Reception modeReports Storing numbersSending originals Index by PurposeAL-2060