Sharp AL-2060 Setting the Recall Interval, 10RECALL INT. Busy, Enter the recall interval 01 to

INITIAL SETTINGS

SETTING THE RECALL INTERVAL

The machine will automatically reattempt transmission when a transmission is not successful because the line is busy or a communication error occurs. This setting is used to select the interval between recall attempts.

• If a transmission is still not successful after the set number of recall attempts is made, a report will

Note print and the document will be cleared from memory.

•If a communication error occurs because the memory becomes full during transmission, no recall attempts will be made.

•Recall attempts for a direct transmission will only be made when the RSPF is used. Recall attempts will not be made when the document glass is used.

•When the machine is waiting to make a recall attempt for a direct transmission, other operations such as storing a transmission or selecting a function cannot be performed.

When the line is busy

You can select the interval between recall attempts when the line is busy. An interval from 1 to 15 minutes can be selected.

1 Press the [MENU] key. 5 Press the [OK] key.

1,2,3,	1,2,3,
1,2,3,	1,2,3,

SP. FUNC SP. FUNC

2 Press the [] key () or [] key () until "4:USER PROGRAM" appears, and then press the [OK] key.

Selection

"4:USER PROGRAM"

3 Press the [] key () or [] key () until "10:RECALL INT. BUSY" appears, and then press the [OK] key.

Selection

"10:RECALL INT. BUSY"

4 Press the numeric keys to select the recall interval.

Enter the recall interval ("01" to "15").

6 Press the [MENU] key.

Press the [MENU] key to exit.

1,2,3,

1,2,3,

SP. FUNC

32