Sending a Fax by Automatic Dialling
Sending a fax by Direct Keypad Dialling
You can also enter a full number with the number keys and then press the
START/MEMORY key to begin dialling. You can use this method to dial a full number when you don't need to speak to the other party before faxing.
1 Load the document(s).
RESOLUTION/
• If desired, press RECEPTION MODE to set the
resolution and/or contrast.
READY TO SEND
2
3
Enter the number of the receiving machine by pressing the number keys.
•If a pause is required between any of the digits to access a special service or an outside line, press FUNCTION . The pause will appear as a hyphen (two seconds per pause). Several pauses can be entered in a row.
Check the display. If the number of the receiving machine shown is
correct, press START/MEMORY .
• If the number is not correct, press | STOP | to backspace and clear one digit |
|
at a time, and then
34