Sharp FO-P600 Press Twice, Fax, Voice call, When you have finished viewing the list

Page 59

Caller ID (Requires Subscription to Service)

Note: For all units installed in New Zealand, the direct use of the displayed number for call back does not operate properly and must not be used. It is necessary to manually enter the verified correct number for the party called. This will often require the addition or deletion of leading digits from the number shown on the display when dialling manually.

After you have received 30 calls, each new call will delete the oldest call.

All calls will be erased if you unplug the fax or a power failure occurs.

Follow the steps below to view the Caller ID List in the display. If desired, you can immediately dial a number when it appears.

1

Press

twice.

 

 

 

 

<REVIEW CALLS>

 

2

 

 

 

 

 

Press

or

to scroll through the list.

3

 

 

 

If you want to dial one of the numbers in the list, scroll through the list

 

until the number appears in the display.

Fax: If you want to send a fax, load the

document and then press START/MEMORY .

 

Dialling and transmission begin.

Fax:

Voice call: If you want to make a voice

call, pick up the handset (or press ). Dialling begins automatically. (If you

pressed , pick up the handset when the other party answers.)

START/MEMORY

Voice call:

6. Special Functions

4 Press

STOP

when you have finished viewing the list.

 

57

Image 59
Contents FO-P600 Warranty Introduction Yes cannot be used if power fails Public switched telephone networkITU-T Ccitt G3 mode Is for connecting an answering machineImportant safety information Important Notice for NEW Zealand Users Table of Contents Special Functions Table of ContentsLook at the Operation Panel Monitoring phone conversations When speaking through the handset, you can press to allowAbout condensation InstallationUnpacking Checklist Points to keep in mind when setting upConnections Connecting the handsetConnecting the power cord ConnectionsConnecting the telephone line cord Comments Moving your fax and reconnectingAttach the paper tray and paper tray extension Connect the extension phone line to the TEL. SET socket Extension phone optionalRemove the seal covering the TEL. SET socket Loading the Imaging Film Loading the Imaging FilmCompartment Remove the new roll of imaging film from its packagingInsert the green gears Insert the film into the printLoading Printing Paper Loading Printing PaperSelect the print contrast Print contrast settingPress Function once Once Press Once TwicePress Function once Twice Entering Your Name and Fax NumberEntering Your Name and Fax Number Enter your fax number by pressing the number keys max digits Enter a two-digit number for the day 01 to Example the 5th Setting the Date and TimeSetting the Date and Time Press once and onceTo start the clock Enter the year four digitsExample 2001 ExampleTEL/FAX mode Setting the Reception ModeSetting the reception mode Setting the Reception ModeSpeaker Volume AdjustmentVolume Adjustment If you selected Ringer OFF OK ? RingerTransmittable Documents Size and weightSending Faxes Loading the Document Loading the DocumentOther restrictions Adjusting the Resolution and Contrast Adjusting the Resolution and ContrastResolution settings Load the documents Contrast settingsMachine by pressing the number keys Sending a Fax by Normal DiallingSending a Fax by Normal Dialling Digits can be entered. Note a space cannot be entered Sending a Fax by Automatic DiallingStoring fax and phone numbers for automatic dialling Sending a Fax by Automatic DiallingDate and time display Return to to store another number, or pressTo return to Make the desired changes to the name Editing and clearing auto-dial numbersSelect Edit or Clear If you are sending a fax, load the documents Using an auto-dial numberReturn to to edit or clear another number, or press Return to the date and time displaySending a fax by Direct Keypad Dialling Automatic redialling RedialSending a Fax From Memory Sending a Fax From MemoryBroadcasting sending a fax to multiple destinations If the memory becomes full Memory transmissionReceiving Faxes Using TEL/FAX ModePseudo Ring Duration for Tel/Fax Mode Enter a number as follows for the desired duration Using A.M. ModeUsing A.M. Mode Press Function once and once Using FAX ModeUsing FAX Mode Changing the number of ringsNumber from 2 to Using TEL ModeUsing TEL Mode Enter the desired number of rings anyReplace the handset Answer the extension phone when it ringsAnswering with the fax’s handset Answering on an extension phoneOptional Reception Settings Optional Reception SettingsFax Signal Receive Enter the desired number any number from 0 to Example 3 Changing the number for remote fax activationPress To turn on the function, or To turn it offSelect 100% Reception RatioPress To select AUTO, or 2 to Substitute Reception to Memory Substitute Reception to MemoryLoad the documents face down. Maximum of 10 pages Making CopiesCopy Cut-off Answering Machine Connection Connecting an Answering MachineChanging the outgoing message Using the Answering Machine ConnectionUsing the Answering Machine Connection Set the reception mode to A.MQuiet Detect Time Optional A.M. Mode SettingsHow answering machine mode operates Optional A.M. Mode SettingsQuiet Time On A.M. Failure Quiet Start Quiet Detect Start TimeIf you are in New Zealand Caller ID Requires Subscription to ServiceSpecial Functions Press YES to turn on Caller IDViewing the Caller ID list Caller ID Requires Subscription to ServiceHow Caller ID operates Display messagesVoice call When you have finished viewing the listPress Twice FaxPriority Call To delete calls from the Caller ID listBlocking voice calls Press 1 to turn on the function, or To turn it off Distinctive Ring Requires Subscription to ServiceDistinctive Ring Requires Subscription to Service Press once and 6 timesBlocking Reception of Unwanted Faxes Set the reception mode to FAXBlocking Reception of Unwanted Faxes Press START/MEMORY to print the list Setup ListPrinting Lists Telephone Number ListHeadings in Transaction Report Caller-ID ListTransaction Report Press once and twice Transaction Report print conditionPrint head MaintenanceScanning glass and rollers If the scanning glass is difficult to clean HousingProblem Solution TroubleshootingProblems and Solutions Line errorProblems and Solutions Dialling and transmission problemsReception and copying problems Answering machine connection See Loading the Imaging Film on General problemsMessages and Signals Messages and SignalsSubstitute Reception to Memory on page 46. If you Audible signals Clearing Paper Jams Clearing Paper JamsClearing a jammed document Clearing jammed printing paper Sending Faxes Receiving Faxes Quick Reference GuideIndex Index Sharp Corporation of NEW Zealand Limited