PART NAMES AND FUNCTIONS
i !0 t !1 !2 !3
@1 @2 | @3 | @4 | @5 | @6 |
!6 DUAL PAGE COPY () key and indicator (p. 28)
Use to make individual copies of two originals placed side by side on the original table.
!7 Light ( ) and dark ( ) keys and indicators
(p. 17)
Use to adjust the MANUAL ( ) or PHOTO ( ) exposure level.
!8 AUTO IMAGE () key and indicator (p. 20)
Press for automatic copy ratio selection.
!9 TRAY SELECT ( ) key (p. 16)
Use to manually select a paper tray.
@0 PRESET RATIO selector keys and indicators (p. 21)
Use to sequentially select preset reduction/enlargement copy ratios: 50%, 64%, 77%, 95%, 100%, 121%, 129%, 141%, 200%.
@1 ZOOM indicator (p. 21)
Lights up when a zoom ratio is set.
@2 Zoom keys (p. 21)
Use to select any reduction or enlargement copy ratio from 50% to 200% in 1% increments.
@3 Copy ratio display ( ) key (p. 21)
Press and hold down during standby to display the copy ratio in the copy quantity display.
@4 Copy quantity keys
Use to select the desired copy quantity or to make user program entries.
GETTING STARTED
Part names and functions
@5 CLEAR ( ) key
Clears the copy quantity display or terminates a copy run.
Press during standby to display the total number of copies made to date.
1st display |
| 2nd display |
|
|
|
|
|
|
|
|
|
|
|
|
Press and hold down the key. | 12,345 sheets output |
Note: 11" x 17" size copies are counted as two copies.
@6 START ( ) key and indicator
Copying is possible when the indicator is on.
Press to start copying.
Initial settings
The copier assumes the initial settings when it is first turned
on, when the CLEAR ALL ( ) key is pressed, or ap- proximately one minute* after the last copy is made in any mode.
●Copy ratio: 100%
●Exposure: Automatic
●Copy quantity: 0
●Paper feed station: Previously selected paper tray
*This time (auto clear time) can be changed. See page 42,
USER PROGRAMS.
7