Sharp AL-1650 operation manual Main Features

Page 5

MAIN FEATURES

➀High-speed laser copying

●First-copy time is only 7.2 seconds (except in a power save mode or immediately after power on).

●Copying speed is 16 copies/min., which adapts to business use, allowing improvement of working efficiency.

➁High-quality digital image

●High-quality copying at 600 dpi is performed.

●In addition to the automatic exposure mode, the manual exposure can be adjusted in five steps.

●The photo mode copying function allows clear copying of delicate halftone original images such as monochrome photos and color photos. Photo mode is adjustable in five steps.

➂Substantial copying features

●Zoom copying from 50% to 200% in 1% increments can be performed.

●Continuous copying of maximum 99 sheets can also be performed.

●Useful special features such as the XY zoom, black and white reverse, and dual page copy are available.

●Toner save mode reduces toner consumption by approximately 10%.

√Scan once/ Print many

●The copier is equipped with a 1-page memory buffer. This memory allows the copier to scan an original 1 time only and make up to 99 copies. This feature allows for improved workflow, reduced operating noise from the copier and reduced wear and tear on the scanning mechanism, which provides for a higher reliability.

➄Printer feature

● This copier can be used as a laser printer.

≈Environmentally friendly design

●Paper output tray is housed in the copier for space saving.

●Preheat mode and auto power shut-off mode are provided to reduce power consumption.

This copier does not have an internal calendar or clock.

This copier will not be affected by the year 2000.

GETTING STARTED

Main features

3

Image 5

Contents AL-1650 For Your Protection Contents Safety Precautions Main Features Part Names and Functions Part Names and Functions Original Size Enter key and indicators p AUTO/MANUAL/PHOTO / / key and indicators pPaper Size indicators Alarm indicatorsLight and dark keys and indicators Dual page Copy key and indicator pAuto Image key and indicator p @0 Preset Ratio selector keys and indicators pDo not install your copier in areas that are Copier InstallationGetting Started Unpacking Checking Packed Components and AccessoriesGently lift and pull out the paper tray until it stops Install the TD cartridgeSET-UP SET-UP Turn the power switch on Load copy paperFront of the paper tray Store the pressure plate lock which has been removedPush the paper tray firmly back into the copier Loading Copy PaperLoading Copy Paper Press the Start key and then the Paper Size 11ENTER key Turn the power switch on Using the SPFAdjust the copy density Normal CopyingStream feeding mode Set the number of copies using the two copy quantity KeysNormal Copying Press the Start keyUsing the original table Normal Copying Automatic REDUCTION/ENLARGEMENT/ZOOMPress the Auto Image Key Enter the number of copies Press the Start keyManual REDUCTION/ENLARGEMENT/ZOOMUnfold the bypass tray Bypass Feed special paperPress the Tray Select key to select the bypass Bypass Feed special paperTWO-SIDED Copying Press the copy ratio display Key XY ZoomPress the XY-ZOOM key Set the number of copies and press the Start key XY ZoomPress the B/W Reverse key Check the copy paper size ReversePress the Dual page Copy key Dual page CopyPress the Interrupt key Interrupting a Copy RUNStart key to resume copying Replace the original for the interrupted job and pressAutomatic Exposure Adjustment To enter the toner save mode, press the light key Toner Save ModePress the AUTO/MANUAL/PHOTO Key To select the Manual Mode Genuine Supplies TD Cartridge ReplacementTD Cartridge Replacement By the right hand. Lift the cartridge by the handle while To remove itCartridge out until the green strap handle can be grasped Gently install the TD cartridge. To install the TD cartridge Drum Cartridge ReplacementMisfeed in the SPF Misfeed RemovalFirst confirm the misfeed location Right feeding roller cover and remove the misfedMisfeed in the bypass tray Misfeed RemovalMisfeed in the copier Gently pull the misfed paper outPush gently the right side of the front cover to open Cover Fusing unit is hot. Take care in removing paperRemoving it On either side of the guide and remove the misfed paper Open the paper guide by pressing down the projectionClose the side cover by pressing the handle on the cover Misfeed in the upper paper trayMisfeed in the lower paper tray Remove the misfed paper Enter a program number using the left copy quantity Key Setting the user programsUser Programs List of user programsUser Programs Select the desired parameter using the right copy quantityAuto power shut-off mode Power Save ModesPreheat mode Copying from the preheat mode Power Save ModesSetting the power save modes Original table and document feeder cover User MaintenanceBypass tray paper feed roller Transfer chargerGently lift and pull out the upper paper tray and take User MaintenanceCharger cleaner out by holding the tab Copier TROUBLE? Problem SolutionExample Self-diagnostic functionCopier TROUBLE? Types and sizes of copy paper SuppliesSupply part numbers Supply listGenuine supplies statement SuppliesProper storage Store copy paper in the wrapper and lying flatPush the paper tray back into the copier Turn the power switch off and disconnect the power CordMoving Instructions Copier SpecificationsSingle Pass Feeder SpecificationsIndex Index Material Safety Data Sheet Special Fire Fighting Procedure Ignition TemperatureFlash Point Method Used Flammable LimitsHealth Hazards Ingredients CAS No ProportionOther Limits None required under normal use Memo Memo Page Sharp Corporation