3Com 86-0621-000, C36460T software manual XW-IP/IPX/AT Data/Voice Router

32

PathBuilder S400 Series Switches

The PathBuilder S400 series switches support the following software packages:

■XW–IP/IPX/AT Data/Voice Router

■XE–IP/IPX/AT Data/Voice Router with 56-bit Encryption

■XL–IP/IPX/AT Data/Voice Router with 40-bit Encryption

■XS-IP/IPX/AT Data/Voice Router with 128-bit Encryption and 3DES

■MW–Multiprotocol Data/Voice Router

■ME–Multiprotocol Router with 56-bit Encryption

■ML–Multiprotocol Router with 40-bit Encryption

■MS–Multiprotocol Router with 128-bit Encryption and 3DES

Table 5 lists the software features in each package for the PathBuilder S400 series switches.

Table 5 PathBuilder S400 Series Switches Software Features

Software Package

Feature	XW	XL	XE	XS	MW	ML	ME	MS
Voice Support (Analog)	X	X	X	X	X	X	X	X
FXO	X	X	X	X	X	X	X	X
FXS	X	X	X	X	X	X	X	X
Voice/FAX over IP	X	X	X	X	X	X	X	X
Voice/FAX over Frame Relay	X	X	X	X	X	X	X	X
Core Features*	X	X	X	X	X	X	X	X
Boundary Routing® central node					X	X	X	X
Boundary Routing leaf node
40-Bit Encryption (IPSec)			X	X		X	X	X
56-Bit Encryption (IP Sec)			X	X			X	X
128-Bit Encryption (IP Sec)				X				X
IPCP	X	X	X	X	X	X	X	X
IPv6/BGP					X	X	X	X
VRRP (Ethernet/FDDI/Token Ring)	X	X	X	X	X	X	X	X
VRRP for DLSW					X	X	X	X
VRRP over VLAN	X	X	X	X	X	X	X	X
RSVP, RSVP Proxy	X	X	X	X	X	X	X	X
Multicast IP, PIM, IGMP, MBR	X	X	X	X	X	X	X	X
IP/OSI Connection Services
IPX	X	X	X	X	X	X	X	X
XNS, OSI					X	X	X	X
Appletalk	X	X	X	X	X	X	X	X
VINES, DECnet, Ph-IV, Ph-IV/V GW					X	X	X	X
DLSW					X	X	X	X
NetView Service Point					X	X	X	X

*Core Features include: Bridging (MLN & SRTG in NBII), Telnet, RADIUS Authentication, IP RIP, IP RIPv2/NTP, FTP, TFTP, HTTP

Server/Web Link/Web Link Health Monitor/ HTTP client, PPP (PAP/CHAP), MLP, CCP, X.25, Dial, ASCII Boot and ASCII Capture, Login Banner, SLAMS, Bandwidth on Demand/incoming, SLAM Autotargeting, Domain Name Support, NHRP for IP tunnels.