3Com C36460T, 86-0621-000 NETBuilder II Firmware Requirements, Memory Requirements, Module

11.4 Software Packages 25

Table 1 NETBuilder II Software Features (continued)

		Software Packages
Feature	AC	DW	DL	DE	DS
MS-CHAP			X	X	X
EAP Authentication		X	X	X	X
VPN/PPTP/L2TP/L2TP (FP) Tunnel	X	X	X	X	X
Switch PPTP/L2TP (R2R, VLL)
IP (Routing, FireWall, NAT, Proxy,	X	X	X	X	X
ARP, DHCP, DHCP Proxy, Traffic
Director, Internal IP Ports, IPQoS)
IP OSPF	X	X	X	X	X
IPX NLSP	X	X	X	X	X
Virtual Ports	512	512	512	512	512
Restricted Number of DHCP
Addresses
Max Physical Voice Ports
Max Physical Data Ports	128	128	128	128	128
Memory Requirements
DRAM	40/80 MB	40/80 MB	40/80 MB	40/80 MB	40/80 MB
Flash memory (Minimum required	10 MB	10 MB	10 MB	10 MB	10 MB
for Enterprise OS 11.4)
Flash memory (Minimum required	20 MB	20 MB	20 MB	20 MB	20 MB
for Dual Images)

*Core Features include: Bridging (MLN & SRTG in NBII), Telnet, RADIUS Authentication, IP RIP, IP RIPv2/NTP, FTP, TFTP, HTTP Server/Web Link/ Web Link Health Monitor/ HTTP client, PPP (PAP/CHAP), MLP, CCP, X.25, Dial, ASCII Boot and ASCII Capture, Login Banner, SLAMS, Bandwidth on Demand/incoming, SLAM Autotargeting, Domain Name Support, NHRP for IP tunnels.

NETBuilder II Firmware Requirements

The NETBuilder II I/O modules require firmware upgrades to support the Enterprise OS software version 11.4 (see Table 2 for firmware requirements).

You can determine your I/O module firmware version through the software by entering:

SHow -SYS IOI

Table 2 NETBuilder II Firmware Requirements

Module 11.4 Firmware Version Strings

DPEFW/DPE-BOOT1,1.7

FW/DPE-BOOT2,1.7

MP Ethernet 6-port Fast Ethernet 100Base 8-port HSS BRI

MP ATMLink

HSS 3-port (V.35)

HSS 3-port (RS-449)

HSS 3-port (RS-232)

HSS 4-port

FW/6ETH-FW,1.4.0.70 FW/ETH100-FW,1.9 FW/8BRI-FW,1.5 FW/ATM-FW,1.1.0.70 FW/HSS3-V35,1.1.11 FW/HSS3-449,1.1.11 FW/HSS3-232,1.1.11 FW/4PORTWAN-FW,1.5