3Com C36460T, 86-0621-000 Domain Name Use in FTP and Tftp Commands, Secure VPN Manager version

New Features and Feature Enhancements 21

message identifier(s) and /or SYSLOG server. The action to send all messages to the SYSLOG server is still the default when auditing is enabled.

■The audit log messages can also be sent out through an SNMP trap to be received by the configured SNMP trap manager(s).

Domain Name Use in FTP and TFTP Commands

Starting with 11.4, a domain name can be used in the FTP commands of GET and PUT, as well as the TFTP command of COpy to specify the name of the FTP or TFTP server. Previously, only the IP address of the FTP or TFTP server could be used for these commands. This function assumes that there is a Domain Name server on the network with the name/address mapping configured; the Enterprise OS device continues to act only as a FTP/TFTP client.

Transcend VPN With more VPN management applications available and planned for the future, Application Suite Secure VPN Manager and the new PKI Manager tools have been bundled

together–one part number to use for ordering, one CD-ROM to use for installation. The new package will be called Transcend VPN Application Suite.

Secure VPN Manager version 2.2

Secure VPN Manager is a graphical web-based network management tool that presents key information about your virtual private network (VPN). Secure VPN Manager provides the assistance necessary to monitor the VPN tunnels terminated by the NETBuilder bridge/router or the PathBuilder S5xx series of devices. These analyses are possible through the monitoring of the VPN tunnel established for remote access (client-to-LAN) connections) and site-to-site (LAN-to-LAN) connections. The application is supported only on the Windows NT Server platform currently.

Secure VPN Manager supports the following Microsoft devices as tunnel initiators:

■Window 95 with Microsoft Windows 95 Dial-Up Networking 1.3 Upgrade or later

■Window NT with Service Pack 3 and above

Secure VPN Manager supports the following 3Com devices as tunnel initiators and tunnel terminators:

■PathBuilder S5xx series devices running software version 11.3 or later

■NETBuilder bridge/routers running software version 11.3 or later

■PathBuilder S400 series devices software version 11.4 or later

PKI Manager version 1.0

PKI Manager is a graphical, management application to aid Enterprise OS devices in obtaining PKI certificates and Certificate Revocation Lists (CRLs) from various Certificate Authorities (CAs). PKI Manager works as a proxy between the device and the CA. It is responsible for collecting the certificate requests from the devices and generating the CA-specific certificate request syntax (CRS), which in turn is sent to the CA. Once the CA issues the certificate, PKI Manager will retrieve it from the CA and send it to the Enterprise OS device. The CAs that are supported with this first release are Verisign and Entrust. The application is supported only on the Windows NT Server platform currently.