System settings
■Clearance Time Settings
To further strengthen the security settings, you can have data clearing repeated a set number of times in each area.
Select the select box 
of each item and select the number of times that you wish data clearing to be repeated. When finished, select the [OK] key.
●Number of Times Data Clear is Repeated
The number of times data clearing is repeated when "Clear All Memory", "Clear Print Hold Data", "Clear All Data in Jobs Completed List", or "Clear User List Data" is executed can be set to any number from 1 to 7. The factory setting is 1.
●Number of Times Power Up Auto Clear Program is Repeated
The number of times "Power Up Auto Clear" is repeated can be set to any number from 1 to 7. The factory setting is 1.
This setting is only enabled when the [Power Up Auto Clear] checkbox is selected.
●Number of Times Auto Clear at Job End Program is Repeated
The number of times auto clear is repeated after each job is completed can be set to any number from 1 to 7. The factory setting is 1.
About the repeat setting
When the repeat setting (number of repetitions) is increased to enhance the security function, the time required for data clearing increases.
It is recommended that you select repeat settings for "Number of Times Data Clear is Repeated", "Number of Times Power Up Auto Clear Program is Repeated", and "Number of Times Auto Clear at Job End Program is Repeated" that are suitable for your security needs and conditions of use.
15