Sharp AR-M205, AR-M160 operation manual XY Zoom copying, Press the Copy ratio display key

Page 26

COPY FUNCTIONS

SELECTING THE VERTICAL AND HORIZONTAL COPY RATIOS SEPARATELY

(XY ZOOM copying)

The XY ZOOM feature allows the horizontal and vertical copy ratios to be changed independently. Example: Reduction only in the horizontal direction.

 

Original

Copy

 

 

This feature cannot be used with the 2 IN 1 or 4 IN 1 feature. (p.34)

Note

To use the XY ZOOM feature with the DUAL PAGE COPY feature, set the DUAL PAGE COPY feature first and

 

then the XY ZOOM feature.

 

The XY ZOOM feature cannot be used in combination with the AUTO IMAGE function.

 

 

 

Ratios that can be selected will vary depending on the position of the original.

Original position

Selectable ratios

 

 

Document glass

25% – 400%

 

 

SPF/RSPF

50% – 200%

 

 

1 Place the original(s) in the document feeder tray or on the document glass.

2 If the original is placed on the document glass, select the original size. (p.18)

3 Press the [XY-ZOOM] key.

 

XY-ZOOM Indicator

XY-

lights up.

The current value for the

ZOOM

 

vertical direction will

 

appear in the display.

4 Use the [PRESET RATIO] selector keys ( , ) and [Zoom] keys ( , ) to change the copy ratio in the vertical direction.

 

Press the [PRESET

 

PRESET RATIO 25 400%

RATIO] selector keys

 

( , ) to select a ratio

 

close to the desired ratio,

 

and then press the

 

 

[Zoom] keys ( ,

) to

 

adjust the ratio in

 

increments of 1%.

The ratio appears in the display.

5 Press the [Copy ratio display] key ( ).

The selected ratio for the vertical direction will be

ZOOMentered.

24

Image 26
Contents AR-M160 AR-M205For Your Records Contents User Settings Changes, e.g., near an Important Points When Selecting AN Installation SiteDo not install your machine in areas that are Air conditioner orDo not touch the photoconductive drum green portion Safety precautionsTrademark acknowledgements Scratches or smudges on the drum will cause dirty copiesSoftware Setup Guide separate manual Using the ManualOnline Manual on the accessory CD-ROM Environmental InformationConventions Used in this Manual SPF and Rspf Differences Between ModelsMain Features Part Names and Functions Before Using the Machine Operation Panel Original Size Enter key/ORIGINAL Size indicators Power Save indicatorZoom indicator Paper Size indicatorsPower OFF Power on and OFFPower on Power Save ModesPaper Paper tray type Paper type Size Weight CapacityLoading Paper Special papersLocks in place Loading PaperLoading the paper tray Fan the paperSet the paper guides to the copy paper width Important points when inserting paper in the bypass trayLoading the bypass tray Indicator Changing a TRAY’S Paper Size SettingFollow these steps to change a tray’s paper size setting EnvelopesImportant points when using the printer mode Press the Start key and then the Paper Size Enter keyClose the document cover/SPF/RSPF Normal CopyingCopying from the document glass Set the number of copies Copying from the SPF/RSPFSet the originals face up in the document feeder tray Copy FunctionsRemoving the document cover Auto paper select modeStream feeding mode Originals that can be used in the SPF/RSPFSelecting the Tray Auto tray switchingMaking a Copy Darker or Lighter Original typesREDUCTION/ENLARGMENT/ZOOM Setting the Number of CopiesImportant note when making a large number of copies Automatic Ratio SelectionManual Ratio Selection Selecting a preset ratioFine adjustment of the ratio Press the Auto Image keyXY Zoom copying Press the Copy ratio display keyNumber of copies display Place original B as shown below TWO-SIDED Copying Using the Bypass TrayCopy original a Automatic TWO-SIDED Copying RspfPress the Start key Using the document glassUsing the Rspf Place originals in the RSPF. p.19Image Rotation in Duplex Copying Press a numeric key to enter Setting codePress the Original to Copy key to exit the setting Dual page Copying Original Copy 2 x 11 paper is used for dual page copyingReplace the previous originals and press the Start key Interrupting a Copy RUNPress the Interrupt key to interrupt the copy run Rotating the Image 90 Degrees Sort Copy / Group CopyIf the memory becomes full Using the SPF/RSPFPress the SORT/GROUP key to select the desired mode If the paper output tray becomes fullCopying Multiple Originals Onto a Single Sheet of Paper Using 2 in 1 / 4 in 1 copy in combination with sort copyMode is selected Order 2 in 1, 4Select the setting code by pressing a numeric key Setting the layout patternUse the 2 in 1 / 4 in 1 key to access the setting Press the 2 in 1 / 4 in 1 key to exit the settingPlace the originals Creating Margins When CopyingSelect the location of the margin AR-M205 only Press the 1 key or the 2 key, and then press the Start keyPress the Erase key to select the desired erase mode Erasing Shadows around the Edges of a CopySystem requirements for USB 2.0 Hi-Speed mode PRINTER/SCANNER FunctionsPausing a print job Using the Printer ModeBasic Procedure for Printing When Use close paper size is disabledPress the Scan key Press a Scan Menu key to begin Scanning Using the Scanner ModeScanning Using the Keys on the Machine PRINTER/SCANNER Functions Operation in COPY, PRINTER, and Scanner ModesScan Menu keys and the Button Manager scan menu Adjusting the Automatic Exposure Level Press the AUTO/TEXT/PHOTO key to complete the settingPhoto indicator stops blinking and lights steadily Enabling Toner Save ModeWhen enabling toner Save mode, make sureCustomizing Settings User ProgramsLeft edge User SettingsPattern 300dpiAuto Press the Light key to complete the settings Selecting a Setting for a User ProgramBase settings Enter the program number withAuditing Mode Settings Settings for Auditing ModeAuditing Mode Selecting Auditing Mode Settings Enter the program number with the numeric keysAccount number change Auditing modeAccount number entry Account number deletionResetting account Copying when Auditing mode is enabledAny of the alarm indicator TroubleshootingThis chapter describes troubleshooting and misfeed removal Machine does not print. on Line indicator does not blinkMACHINE/COPYING Problems Paper curled or damp Problem Cause and solution Misfeed occurPaper is outside of the specified size and weight Range Paper is not loaded properlyAny other indicators are lit Problem Cause and solution Copying or printing is performedDisplay or the Original Data indicator is blinking Be set An interrupt copy job is in progressPrinting and Scanning Problems Printed image is dirty Runs off the paperLines in tables are not aligned Correctly and gaps appearPoor scanning quality You have not specified a suitable resolutionBrightness and contrast settings are not suitable Quick Scan has been selectedYou do not have Administrator rights There is not enough computer memoryClick the start button, and then click Control Panel What to do when a notice page is printedRemoving the software Click Add or Remove ProgramsIndicators and Display Messages Remove the misfed original Misfeed RemovalMisfeed in the SPF/RSPF Section aSection C Misfeed indicator will go outMisfeed in the Bypass Tray Close the front cover and side cover Misfeed in the MachineMisfeed in the paper feed area Be careful not to tearMisfeed in the fusing area Be careful not to tear the misfed paper during removal Misfeed in the transport areaClose the side cover Push the upper paper tray in completely Misfeed in the Upper Paper TrayClose the upper paper tray Close the lower side cover Open the lower side coverRemove the misfed paper Close the lower paper trayClose the front cover Toner cartridge replacement required indicator will go outReplacing the Toner Cartridge Discard the shutterTotal output count Checking the Total Output Count and Toner LevelChecking the Total Output Count Total copy countDo not spray flammable cleaner gas Routine MaintenanceCleaning the Document Glass and SPF/RSPF/DOCUMENT Cover Checking the Toner LevelReturn the charger cleaner to its Cleaning the Bypass Tray Paper Feed RollerCleaning the Transfer Charger Original position. Close the upperOption that can be installed On the AR-M205 On the AR-M160 Peripheral DevicesSheet Paper Feed Unit 250-SHEET Paper Feed Unit SpecificationsSingle Pass Feeder Reversing Single Pass Feeder Part namesDual Function Board SpecificationStorage of Supplies Proper StorageSpecifications RAL-UZ62 Printer FunctionAppendix Scanner Function Software License Page Substance PreparationX Ingredient CAS No Proportion Product NameSupplier Identification Sharp Corporation Osha PELMethods for Cleaning Up Personal PrecautionsEnvironmental Precautions Most Important Hazards and Effects of the ProductsBoiling/Melting Point Exposure limit valuesPersonal Protective Equipment Softening Point C4/4 No data are availableAR-202ND / AR-202DV / AR-202SD / AR-202SD-C Black Developer Osha PEL Acgih TLV MAK-TWA NOHSC-TWAData Issued Jun Msds No. F-31211 Physical and Chemical Properties Ecological Information Index 11, 62 Preset Ratio selector indicator10, 62 Misfeed removalIndicators, lit and blinking Machine settingsProblem occurs Index by PurposePage Sharp Corporation
Related manuals
Manual 33 pages 13.5 Kb Manual 20 pages 22.01 Kb Manual 86 pages 12 Kb

AR-M205, AR-M160 specifications

The Sharp AR-M160 and AR-M205 are multifunctional copiers designed to meet the needs of small to medium-sized businesses. These models provide essential features that promote efficiency and productivity in any office environment. Both devices are equipped with advanced technologies that enhance their functionality and user-friendliness, making them ideal for daily document handling tasks.

One of the main features of the AR-M160 and AR-M205 is their impressive print and copy capabilities. The AR-M160 offers a print speed of up to 16 pages per minute, while the AR-M205 steps it up to an exceptional 20 pages per minute. This difference in speed can significantly impact workflow, especially in high-volume settings. Both models support a variety of paper sizes, including letter, legal, and A4, allowing users to manage diverse document tasks efficiently.

The AR-M160 and AR-M205 also provide excellent image quality, delivering sharp text and clear graphics. With a maximum print resolution of 1200 x 600 dots per inch, these machines ensure that every document produced is of professional quality. The advanced imaging technologies employed in these copiers, such as automatic exposure control and image processing, contribute to consistent and reliable results.

In terms of functionality, both the AR-M160 and the AR-M205 feature a user-friendly control panel that simplifies operation. The 7-inch color touchscreen provides intuitive navigation and easy access to various settings. Additionally, the devices support a range of finishing options, including stapling, hole-punching, and folding, allowing businesses to produce polished documents in-house.

Another notable characteristic of these models is their network connectivity. The AR-M160 and AR-M205 can be easily integrated into existing office networks, enabling users to print and scan documents from multiple devices. They support built-in network printing via Ethernet, as well as an optional wireless connection, ensuring flexibility and accessibility for all users.

Security is also a priority with these multifunction devices. They come equipped with various security features such as user authentication, secure print, and data encryption, which help protect sensitive information and ensure compliance with data protection regulations.

Overall, the Sharp AR-M160 and AR-M205 multifunction copiers embody reliability, efficiency, and high-quality output, making them valuable assets for any office environment. Their combination of advanced features, ease of use, and solid performance helps streamline document workflows and enhances productivity in today's fast-paced business world.