Sharp AR-M160, AR-M205 operation manual Erasing Shadows around the Edges of a Copy

ERASING SHADOWS AROUND THE EDGES OF A COPY

(Erase copy)

●This feature is used to erase shadows that appear around the edges of copies of books and other thick originals.

(EDGE ERASE)

●The feature can also erase the shadow that appears down the center of books and other originals that open up.

(CENTER ERASE)

●The factory default setting for the width of the erasure is approximately 1/2". The width can be changed in the user programs. (p.45)

EDGE ERASE

A	A
Original	Copy

CENTER ERASE

ABA B

EDGE + CENTER ERASE

A B	A B
Original	Copy

3

	Original	Copy
•	Center erase cannot be used in combination with dual page copy.
Note •	Erase copy cannot be used in combination with 2 IN 1 / 4 IN 1 copy. (p.34)

•Erase copy cannot be used when the paper is a special size or copying from the bypass tray.

•Note that if the width of the erasure is too large, the edge of the image may be partially erased.

1 Place the original(s). (p.18)

2 If the original is placed on the document glass, select the original size. (p.18)

When using the SPF/RSPF, make sure that the same ORIGINAL SIZE indicator as your original size lights up.

3 Press the [ERASE] key to select the desired erase mode.

	To select the "EDGE +
EDGE	CENTER ERASE" mode,
	press the [ERASE] key
ERASE
CENTER	until both the EDGE and
	CENTER indicators light
	up.

4 Set the number of copies and other settings, and then press the [START] key ().

The copy is delivered to the paper output tray.

• To cancel erase copy, press the [ERASE]

Note key repeatedly until the ERASE indicators are both off.

•If the original size was not selected in step 2, erase copy cannot be used.

37