Sharp AR-M160, AR-M205 operation manual Scanner Function

Page 81

APPENDIX

Scanner Function

Type

Flatbed scanner

 

 

Scanning method

Document glass / SPF/RSPF

 

 

Light source

Cold cathode fluorescent lamp

 

 

Resolution*

Basic: 600 dpi x 600 dpi

Setting range: 50dpi - 9600dpi

 

 

 

Original types

Sheet media, books

 

 

Effective scanning area

11-45/64" (297 mm) (Lengthwise) x 16-63/64" (431 mm) (Width)

 

 

Scanning speed

2.88 msec/line

 

 

Input Data

1 bit or 12 bit

 

 

Output Data

1 bit or 8 bit

 

 

Scanning colors

Black and white 2 value, Grayscale, Full color

 

 

Protocol

TWAIN / WIA (Windows XP only) / STI

 

 

Interface port

USB port (USB 1.1)

USB port (USB 2.0, dual function board must be installed)

 

 

 

Drop out color

Yes

 

 

Supported operating

Windows98/Me

Windows 2000 Professional/Windows XP Home Edition/Professional

systems

(Detailed information can be found in the Software Setup Guide)

 

 

 

Void area

Top and bottom edges 7/64" (2.5 mm) due to scanner driver

Right and left edges 1/8" (3.0 mm)

 

 

 

 

[USB cable (only for connection to USB 1.1 port)]

Interface cables

Shielded twisted pair cable (max. length 10 feet (3 m))

[USB cable (only for connection to USB 2.0 port)]

 

Shielded twisted pair cable (max. length 10 feet (3 m), must support USB 2.0)

 

Please purchase a commercially available USB cable.

 

 

*The resolution may be enhanced by the scanner driver depending on the scanned area and amount of memory installed in the machine.

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification Note changes for product improvement without prior notice. The performance specification figures indicated are

nominal values of production units. There may be some deviations from these values in individual units.

9

79

Image 81
Contents AR-M205 AR-M160For Your Records Contents User Settings Do not install your machine in areas that are Important Points When Selecting AN Installation SiteChanges, e.g., near an Air conditioner orTrademark acknowledgements Safety precautionsDo not touch the photoconductive drum green portion Scratches or smudges on the drum will cause dirty copiesOnline Manual on the accessory CD-ROM Using the ManualSoftware Setup Guide separate manual Environmental InformationSPF and Rspf Differences Between Models Conventions Used in this ManualMain Features Part Names and Functions Before Using the Machine Operation Panel Zoom indicator Power Save indicatorOriginal Size Enter key/ORIGINAL Size indicators Paper Size indicatorsPower on Power on and OFFPower OFF Power Save ModesLoading Paper Paper tray type Paper type Size Weight CapacityPaper Special papersLoading the paper tray Loading PaperLocks in place Fan the paperImportant points when inserting paper in the bypass tray Loading the bypass traySet the paper guides to the copy paper width Follow these steps to change a tray’s paper size setting Changing a TRAY’S Paper Size SettingIndicator EnvelopesPress the Start key and then the Paper Size Enter key Important points when using the printer modeNormal Copying Copying from the document glassClose the document cover/SPF/RSPF Set the originals face up in the document feeder tray Copying from the SPF/RSPFSet the number of copies Copy FunctionsStream feeding mode Auto paper select modeRemoving the document cover Originals that can be used in the SPF/RSPFMaking a Copy Darker or Lighter Auto tray switchingSelecting the Tray Original typesImportant note when making a large number of copies Setting the Number of CopiesREDUCTION/ENLARGMENT/ZOOM Automatic Ratio SelectionFine adjustment of the ratio Selecting a preset ratioManual Ratio Selection Press the Auto Image keyPress the Copy ratio display key XY Zoom copyingNumber of copies display TWO-SIDED Copying Using the Bypass Tray Copy original aPlace original B as shown below Rspf Automatic TWO-SIDED CopyingUsing the Rspf Using the document glassPress the Start key Place originals in the RSPF. p.19Press a numeric key to enter Setting code Press the Original to Copy key to exit the settingImage Rotation in Duplex Copying Original Copy 2 x 11 paper is used for dual page copying Dual page CopyingInterrupting a Copy RUN Press the Interrupt key to interrupt the copy runReplace the previous originals and press the Start key Sort Copy / Group Copy Rotating the Image 90 DegreesPress the SORT/GROUP key to select the desired mode Using the SPF/RSPFIf the memory becomes full If the paper output tray becomes fullMode is selected Using 2 in 1 / 4 in 1 copy in combination with sort copyCopying Multiple Originals Onto a Single Sheet of Paper Order 2 in 1, 4Use the 2 in 1 / 4 in 1 key to access the setting Setting the layout patternSelect the setting code by pressing a numeric key Press the 2 in 1 / 4 in 1 key to exit the settingSelect the location of the margin AR-M205 only Creating Margins When CopyingPlace the originals Press the 1 key or the 2 key, and then press the Start keyErasing Shadows around the Edges of a Copy Press the Erase key to select the desired erase modePRINTER/SCANNER Functions System requirements for USB 2.0 Hi-Speed modeBasic Procedure for Printing Using the Printer ModePausing a print job When Use close paper size is disabledUsing the Scanner Mode Scanning Using the Keys on the MachinePress the Scan key Press a Scan Menu key to begin Scanning Operation in COPY, PRINTER, and Scanner Modes Scan Menu keys and the Button Manager scan menuPRINTER/SCANNER Functions Press the AUTO/TEXT/PHOTO key to complete the setting Adjusting the Automatic Exposure LevelWhen enabling toner Enabling Toner Save ModePhoto indicator stops blinking and lights steadily Save mode, make sureUser Programs Customizing SettingsPattern User SettingsLeft edge 300dpiAuto Base settings Selecting a Setting for a User ProgramPress the Light key to complete the settings Enter the program number withSettings for Auditing Mode Auditing ModeAuditing Mode Settings Enter the program number with the numeric keys Selecting Auditing Mode SettingsAccount number entry Auditing modeAccount number change Account number deletionCopying when Auditing mode is enabled Resetting accountThis chapter describes troubleshooting and misfeed removal TroubleshootingAny of the alarm indicator Machine does not print. on Line indicator does not blinkMACHINE/COPYING Problems Paper is outside of the specified size and weight Range Problem Cause and solution Misfeed occurPaper curled or damp Paper is not loaded properlyDisplay or the Original Data indicator is blinking Problem Cause and solution Copying or printing is performedAny other indicators are lit Be set An interrupt copy job is in progressPrinting and Scanning Problems Runs off the paper Printed image is dirtyCorrectly and gaps appear Lines in tables are not alignedBrightness and contrast settings are not suitable You have not specified a suitable resolutionPoor scanning quality Quick Scan has been selectedThere is not enough computer memory You do not have Administrator rightsRemoving the software What to do when a notice page is printedClick the start button, and then click Control Panel Click Add or Remove ProgramsIndicators and Display Messages Misfeed in the SPF/RSPF Misfeed RemovalRemove the misfed original Section aMisfeed indicator will go out Misfeed in the Bypass TraySection C Misfeed in the paper feed area Misfeed in the MachineClose the front cover and side cover Be careful not to tearMisfeed in the fusing area Misfeed in the transport area Close the side coverBe careful not to tear the misfed paper during removal Misfeed in the Upper Paper Tray Close the upper paper trayPush the upper paper tray in completely Remove the misfed paper Open the lower side coverClose the lower side cover Close the lower paper trayReplacing the Toner Cartridge Toner cartridge replacement required indicator will go outClose the front cover Discard the shutterChecking the Total Output Count Checking the Total Output Count and Toner LevelTotal output count Total copy countCleaning the Document Glass and SPF/RSPF/DOCUMENT Cover Routine MaintenanceDo not spray flammable cleaner gas Checking the Toner LevelCleaning the Transfer Charger Cleaning the Bypass Tray Paper Feed RollerReturn the charger cleaner to its Original position. Close the upperPeripheral Devices Option that can be installed On the AR-M205 On the AR-M160Single Pass Feeder Reversing Single Pass Feeder SpecificationsSheet Paper Feed Unit 250-SHEET Paper Feed Unit Part namesStorage of Supplies SpecificationDual Function Board Proper StorageSpecifications Printer Function AppendixRAL-UZ62 Scanner Function Software License Page Supplier Identification Sharp Corporation Product NameSubstance PreparationX Ingredient CAS No Proportion Osha PELEnvironmental Precautions Personal PrecautionsMethods for Cleaning Up Most Important Hazards and Effects of the ProductsPersonal Protective Equipment Exposure limit valuesBoiling/Melting Point Softening Point CNo data are available 4/4Osha PEL Acgih TLV MAK-TWA NOHSC-TWA AR-202ND / AR-202DV / AR-202SD / AR-202SD-C Black DeveloperData Issued Jun Msds No. F-31211 Physical and Chemical Properties Ecological Information Index 10, 62 Preset Ratio selector indicator11, 62 Misfeed removalProblem occurs Machine settingsIndicators, lit and blinking Index by PurposePage Sharp Corporation
Related manuals
Manual 33 pages 13.5 Kb Manual 20 pages 22.01 Kb Manual 86 pages 12 Kb

AR-M205, AR-M160 specifications

The Sharp AR-M160 and AR-M205 are multifunctional copiers designed to meet the needs of small to medium-sized businesses. These models provide essential features that promote efficiency and productivity in any office environment. Both devices are equipped with advanced technologies that enhance their functionality and user-friendliness, making them ideal for daily document handling tasks.

One of the main features of the AR-M160 and AR-M205 is their impressive print and copy capabilities. The AR-M160 offers a print speed of up to 16 pages per minute, while the AR-M205 steps it up to an exceptional 20 pages per minute. This difference in speed can significantly impact workflow, especially in high-volume settings. Both models support a variety of paper sizes, including letter, legal, and A4, allowing users to manage diverse document tasks efficiently.

The AR-M160 and AR-M205 also provide excellent image quality, delivering sharp text and clear graphics. With a maximum print resolution of 1200 x 600 dots per inch, these machines ensure that every document produced is of professional quality. The advanced imaging technologies employed in these copiers, such as automatic exposure control and image processing, contribute to consistent and reliable results.

In terms of functionality, both the AR-M160 and the AR-M205 feature a user-friendly control panel that simplifies operation. The 7-inch color touchscreen provides intuitive navigation and easy access to various settings. Additionally, the devices support a range of finishing options, including stapling, hole-punching, and folding, allowing businesses to produce polished documents in-house.

Another notable characteristic of these models is their network connectivity. The AR-M160 and AR-M205 can be easily integrated into existing office networks, enabling users to print and scan documents from multiple devices. They support built-in network printing via Ethernet, as well as an optional wireless connection, ensuring flexibility and accessibility for all users.

Security is also a priority with these multifunction devices. They come equipped with various security features such as user authentication, secure print, and data encryption, which help protect sensitive information and ensure compliance with data protection regulations.

Overall, the Sharp AR-M160 and AR-M205 multifunction copiers embody reliability, efficiency, and high-quality output, making them valuable assets for any office environment. Their combination of advanced features, ease of use, and solid performance helps streamline document workflows and enhances productivity in today's fast-paced business world.