Sharp AR-M160 Single Pass Feeder Reversing Single Pass Feeder, Specifications, Part names

Page 77

PERIPHERAL DEVICES AND SUPPLIES

SINGLE PASS FEEDER/

REVERSING SINGLE PASS FEEDER

For the names of the parts of the SPF/RSPF, see "PART NAMES AND FUNCTIONS". (p.8)

Specifications

 

 

AR-SP6

 

AR-RP6

Acceptable

Weight

15 lbs. to 24 lbs. (56 g/m2 to 90 g/m2)

Size

 

5-1/2" x 8-1/2" to 11" x 17"

original

 

Capacity

Up to 40 sheets (Thickness 5/32" (4mm) and below)

 

Detectable original sizes

5-1/2" x 8-1/2", 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17"

Weight

11.1 lbs. (5.0 kg)

 

12.0 lbs. (5.4 kg)

Dimensions

22-61/64" (W) x 17-9/64" (D) x 5-1/4" (H)

(583 mm (W) x 435 mm (D) x 133 mm (H))

 

 

 

 

 

 

 

250-SHEET PAPER FEED UNIT/

2 X 250-SHEET PAPER FEED UNIT

These paper feed units provide the convenience of increased paper capacity for the copier and a greater choice of paper sizes readily available for copying.

The AR-D24 contains one 250-sheet paper tray and the AR-D25 contains two 250-sheet paper trays.

Part names

250-sheet paper feed unit

AR-D24

Side cover

2 x 250-sheet paper feed unit

AR-D25

Side cover

TrayTrays

Specifications

 

AR-D24

AR-D25

8

Paper size

8-1/2" x 11" to 11" x 17"

Paper capacity

One tray with capacity for 250 sheets of

Two trays with capacity for 250 sheets of

 

24 lbs. (90 g/m2) bond paper

24 lbs. (90 g/m2) bond paper

 

Paper weight

15 lbs. to 24 lbs. (56 g/m2 to 90 g/m2)

 

Power supply

Drawn from the machine

 

Dimensions

23-15/64" (W) x16-27/64" (D) x 3-15/32" (H)

23-15/64" (W) x16-27/64" (D) x 6-27/32" (H)

 

(590 mm (W) x 471 mm (D) x 88 mm (H))

(590 mm (W) x 471 mm (D) x 173.5 mm (H))

 

 

 

Weight

10.4 lbs. (4.7 kg)

20.1 lbs. (9.1 kg)

 

 

 

 

 

75

Image 77
Contents AR-M205 AR-M160For Your Records Contents User Settings Do not install your machine in areas that are Important Points When Selecting AN Installation SiteChanges, e.g., near an Air conditioner orTrademark acknowledgements Safety precautionsDo not touch the photoconductive drum green portion Scratches or smudges on the drum will cause dirty copiesOnline Manual on the accessory CD-ROM Using the ManualSoftware Setup Guide separate manual Environmental InformationSPF and Rspf Differences Between Models Conventions Used in this ManualMain Features Part Names and Functions Before Using the Machine Operation Panel Zoom indicator Power Save indicatorOriginal Size Enter key/ORIGINAL Size indicators Paper Size indicatorsPower on Power on and OFFPower OFF Power Save ModesLoading Paper Paper tray type Paper type Size Weight CapacityPaper Special papersLoading the paper tray Loading PaperLocks in place Fan the paperSet the paper guides to the copy paper width Important points when inserting paper in the bypass trayLoading the bypass tray Follow these steps to change a tray’s paper size setting Changing a TRAY’S Paper Size SettingIndicator EnvelopesPress the Start key and then the Paper Size Enter key Important points when using the printer modeClose the document cover/SPF/RSPF Normal CopyingCopying from the document glass Set the originals face up in the document feeder tray Copying from the SPF/RSPFSet the number of copies Copy FunctionsStream feeding mode Auto paper select modeRemoving the document cover Originals that can be used in the SPF/RSPFMaking a Copy Darker or Lighter Auto tray switchingSelecting the Tray Original typesImportant note when making a large number of copies Setting the Number of CopiesREDUCTION/ENLARGMENT/ZOOM Automatic Ratio SelectionFine adjustment of the ratio Selecting a preset ratioManual Ratio Selection Press the Auto Image keyPress the Copy ratio display key XY Zoom copyingNumber of copies display Place original B as shown below TWO-SIDED Copying Using the Bypass TrayCopy original a Rspf Automatic TWO-SIDED CopyingUsing the Rspf Using the document glassPress the Start key Place originals in the RSPF. p.19Image Rotation in Duplex Copying Press a numeric key to enter Setting codePress the Original to Copy key to exit the setting Original Copy 2 x 11 paper is used for dual page copying Dual page CopyingReplace the previous originals and press the Start key Interrupting a Copy RUNPress the Interrupt key to interrupt the copy run Sort Copy / Group Copy Rotating the Image 90 DegreesPress the SORT/GROUP key to select the desired mode Using the SPF/RSPFIf the memory becomes full If the paper output tray becomes fullMode is selected Using 2 in 1 / 4 in 1 copy in combination with sort copyCopying Multiple Originals Onto a Single Sheet of Paper Order 2 in 1, 4Use the 2 in 1 / 4 in 1 key to access the setting Setting the layout patternSelect the setting code by pressing a numeric key Press the 2 in 1 / 4 in 1 key to exit the settingSelect the location of the margin AR-M205 only Creating Margins When CopyingPlace the originals Press the 1 key or the 2 key, and then press the Start keyErasing Shadows around the Edges of a Copy Press the Erase key to select the desired erase modePRINTER/SCANNER Functions System requirements for USB 2.0 Hi-Speed modeBasic Procedure for Printing Using the Printer ModePausing a print job When Use close paper size is disabledPress the Scan key Press a Scan Menu key to begin Scanning Using the Scanner ModeScanning Using the Keys on the Machine PRINTER/SCANNER Functions Operation in COPY, PRINTER, and Scanner ModesScan Menu keys and the Button Manager scan menu Press the AUTO/TEXT/PHOTO key to complete the setting Adjusting the Automatic Exposure LevelWhen enabling toner Enabling Toner Save ModePhoto indicator stops blinking and lights steadily Save mode, make sureUser Programs Customizing SettingsPattern User SettingsLeft edge 300dpiAuto Base settings Selecting a Setting for a User ProgramPress the Light key to complete the settings Enter the program number withAuditing Mode Settings Settings for Auditing ModeAuditing Mode Enter the program number with the numeric keys Selecting Auditing Mode SettingsAccount number entry Auditing modeAccount number change Account number deletionCopying when Auditing mode is enabled Resetting accountThis chapter describes troubleshooting and misfeed removal TroubleshootingAny of the alarm indicator Machine does not print. on Line indicator does not blinkMACHINE/COPYING Problems Paper is outside of the specified size and weight Range Problem Cause and solution Misfeed occurPaper curled or damp Paper is not loaded properlyDisplay or the Original Data indicator is blinking Problem Cause and solution Copying or printing is performedAny other indicators are lit Be set An interrupt copy job is in progressPrinting and Scanning Problems Runs off the paper Printed image is dirtyCorrectly and gaps appear Lines in tables are not alignedBrightness and contrast settings are not suitable You have not specified a suitable resolutionPoor scanning quality Quick Scan has been selectedThere is not enough computer memory You do not have Administrator rightsRemoving the software What to do when a notice page is printedClick the start button, and then click Control Panel Click Add or Remove ProgramsIndicators and Display Messages Misfeed in the SPF/RSPF Misfeed RemovalRemove the misfed original Section aSection C Misfeed indicator will go outMisfeed in the Bypass Tray Misfeed in the paper feed area Misfeed in the MachineClose the front cover and side cover Be careful not to tearMisfeed in the fusing area Be careful not to tear the misfed paper during removal Misfeed in the transport areaClose the side cover Push the upper paper tray in completely Misfeed in the Upper Paper TrayClose the upper paper tray Remove the misfed paper Open the lower side coverClose the lower side cover Close the lower paper trayReplacing the Toner Cartridge Toner cartridge replacement required indicator will go outClose the front cover Discard the shutterChecking the Total Output Count Checking the Total Output Count and Toner LevelTotal output count Total copy countCleaning the Document Glass and SPF/RSPF/DOCUMENT Cover Routine MaintenanceDo not spray flammable cleaner gas Checking the Toner LevelCleaning the Transfer Charger Cleaning the Bypass Tray Paper Feed RollerReturn the charger cleaner to its Original position. Close the upperPeripheral Devices Option that can be installed On the AR-M205 On the AR-M160Single Pass Feeder Reversing Single Pass Feeder SpecificationsSheet Paper Feed Unit 250-SHEET Paper Feed Unit Part namesStorage of Supplies SpecificationDual Function Board Proper StorageSpecifications RAL-UZ62 Printer FunctionAppendix Scanner Function Software License Page Supplier Identification Sharp Corporation Product NameSubstance PreparationX Ingredient CAS No Proportion Osha PELEnvironmental Precautions Personal PrecautionsMethods for Cleaning Up Most Important Hazards and Effects of the ProductsPersonal Protective Equipment Exposure limit valuesBoiling/Melting Point Softening Point CNo data are available 4/4Osha PEL Acgih TLV MAK-TWA NOHSC-TWA AR-202ND / AR-202DV / AR-202SD / AR-202SD-C Black DeveloperData Issued Jun Msds No. F-31211 Physical and Chemical Properties Ecological Information Index 10, 62 Preset Ratio selector indicator11, 62 Misfeed removalProblem occurs Machine settingsIndicators, lit and blinking Index by PurposePage Sharp Corporation
Related manuals
Manual 33 pages 13.5 Kb Manual 20 pages 22.01 Kb Manual 86 pages 12 Kb

AR-M205, AR-M160 specifications

The Sharp AR-M160 and AR-M205 are multifunctional copiers designed to meet the needs of small to medium-sized businesses. These models provide essential features that promote efficiency and productivity in any office environment. Both devices are equipped with advanced technologies that enhance their functionality and user-friendliness, making them ideal for daily document handling tasks.

One of the main features of the AR-M160 and AR-M205 is their impressive print and copy capabilities. The AR-M160 offers a print speed of up to 16 pages per minute, while the AR-M205 steps it up to an exceptional 20 pages per minute. This difference in speed can significantly impact workflow, especially in high-volume settings. Both models support a variety of paper sizes, including letter, legal, and A4, allowing users to manage diverse document tasks efficiently.

The AR-M160 and AR-M205 also provide excellent image quality, delivering sharp text and clear graphics. With a maximum print resolution of 1200 x 600 dots per inch, these machines ensure that every document produced is of professional quality. The advanced imaging technologies employed in these copiers, such as automatic exposure control and image processing, contribute to consistent and reliable results.

In terms of functionality, both the AR-M160 and the AR-M205 feature a user-friendly control panel that simplifies operation. The 7-inch color touchscreen provides intuitive navigation and easy access to various settings. Additionally, the devices support a range of finishing options, including stapling, hole-punching, and folding, allowing businesses to produce polished documents in-house.

Another notable characteristic of these models is their network connectivity. The AR-M160 and AR-M205 can be easily integrated into existing office networks, enabling users to print and scan documents from multiple devices. They support built-in network printing via Ethernet, as well as an optional wireless connection, ensuring flexibility and accessibility for all users.

Security is also a priority with these multifunction devices. They come equipped with various security features such as user authentication, secure print, and data encryption, which help protect sensitive information and ensure compliance with data protection regulations.

Overall, the Sharp AR-M160 and AR-M205 multifunction copiers embody reliability, efficiency, and high-quality output, making them valuable assets for any office environment. Their combination of advanced features, ease of use, and solid performance helps streamline document workflows and enhances productivity in today's fast-paced business world.