Sharp AR-M160, AR-M205 operation manual User Settings, Pattern, Left edge, 300dpi

USER SETTINGS

Program		Setting codes
	Program name	(factory default setting		Explanation
number
		appears in bold)
			• When the auto paper select function is enabled
				and there is no paper that is the same size as
				the original and loaded in the same orientation,
				this function will automatically select paper of
				the same size that is loaded in the opposite
	Rotation copy*2	0: OFF		orientation, and rotate the image 90 degrees so
7				that it is copied on the paper in the correct
		1: ON
				orientation.
			• When the auto ratio select function is operating
				and the original and paper are loaded in
				opposite orientations, this function rotates the
				image so that it is copied on the paper in the
				correct orientation.
			•	This function automatically selects paper that is
		0: OFF		the same size as the original placed in the
8	Auto paper select mode			SPF/RSPF, or the same size as that selected
		1: ON
				with the [ORIGINAL SIZE ENTER] key. The
				function can be disabled.
			• If the paper runs out during printing and there is
		0: OFF		paper of the same size and orientation in
9	Auto tray switching			another tray, this function automatically
		1: ON
				switches to that tray (excluding the bypass
				tray). The function can be disabled.
10 to 15	Auditing mode	–	See "Enabling Audit Mode". (p.50)
		1: 0"	• Use this setting to set the width of erasure of
		2: 1/4"
	Erase width			shadows that appear around the edges and at
16		3: 1/2"
	adjustment*2			the binding margin when a book or similar
		4: 3/4"
				original is copied.	5
		5: 1"
		1: Pattern 1	•	Use this setting to select the layout pattern
	*2			when two original pages are copied onto a
17	Layout in 2 IN 1 copy	2: Pattern 2		single sheet of paper (see page 34 for the
				layout patterns).
		1: Pattern 1	•	Use this setting to select the layout pattern
18	*2	2: Pattern 2		when four original pages are copied onto a
	Layout in 4 IN 1 copy	3: Pattern 3		single sheet of paper (see page 34 for the
		4: Pattern 4		layout patterns).
			• When enabled, this function offsets the position
19	Offset of paper output	0: OFF		in the paper output tray of interrupt copy jobs,
	tray	1: ON		sets of copies during sort/group copy, and print
				jobs when using the printer function.
			•	When a one-sided vertical (portrait) original is
	Image rotation in	0: OFF		placed in a horizontal orientation (8-1/2" x 14"
20				or 11" x 17" size) for two-sided copying, the top
	duplex copying*3	1: ON
				and bottom of the images on the front and back
				of the paper will be opposite to each other.
21	Location of the	1: Left edge	• Use this setting to switch between the margin at
	margin*2,*3	2: Top edge		the top edge and the margin at the left edge.
		1: 0"
	Margin width*2	2: 1/4"
22		3: 1/2"	• Use this setting to set the margin width.
		4: 3/4"
		5: 1"
		1: 300dpi	• The copy resolution in auto and text mode is
23	Resolution in Auto/Text			normally 300 dpi. If high-quality copies are
	mode	2: 600dpi		preferred, use this setting to change the
				resolution to 600 dpi.

*2On models with a dual function board.

*3On models with automatic two-sided copying.

45