Sharp AR-207 operation manual Normal Copying, Adjust the copy density

Page 17

NORMAL COPYING

●The ORIGINAL SIZE indicator for the detected original size will light up, and the paper tray with the corresponding paper size will be automatically selected.

●The auto paper select function can be disabled using user program No. 8. If this function has been disabled, use the TRAY SELECT key to select the desired paper tray. See page 51, USER PROGRAMS.

●To copy onto a different size paper, use the TRAY SELECT key to make the selection.

●The bypass tray cannot be automatically selected.

Ensure that the one-sided to one-sided copying mode is

4 selected in the ORIGINAL TO COPY section of the operation panel.

●When no indicator in the ORIGINAL TO COPY section is lit, the one-sided to one-sided copying mode is selected.

Adjust the copy density.

5 ● This copier has three exposure modes to choose from — AUTOMATIC, MANUAL, and PHOTO.

●Automatic exposure is the standard initial setting for this copier. In this mode, the characteristics of the original are “read” by the exposure system and adjustments are automatically made. This optimizes the contrast of the copied images by reducing the effect of colored or shaded background areas. See page 30 to adjust the automatic exposure level.

●For manual density adjustment, press the AUTO/MANUAL/PHOTO

key to select MANUAL and adjust with the light () and dark () keys as desired.

●For photographs, select PHOTO and then adjust with the light ()

and dark ( ) keys as desired.

●There are 5 exposure steps indicated by 3 indicator lights. (The indicators light up one or two at a time.)

If exposure level 2 is selected, the two left-handmost indicators for that level will light up simultaneously. Also, if level 4 is selected, the two right-handmost indicators for that level will light up simultaneously.

MAKING COPIES Normal copying

15

Image 17

Contents AR-207 Safety Precautions Contents Conventions used in this manual IntroductionMain Features Part Names and Functions Part Names and Functions Zoom indicator p.24 Interrupt key and indicator pPaper Size indicators Alarm indicatorsPreset Ratio selector keys and indicators Start key and indicatorOriginal Size Enter key and indicators Auto Paper Select indicatorAlso make certain the outlet is properly grounded Copier InstallationDo not install your copier in areas that are Do not touch the photoconductive drum green portion Push the paper tray firmly back into the copier Loading Copy PaperGently lift and pull out the paper tray until it stops Loading Copy Paper Press the Start key and then the Paper Size Enter 11 key Auditing Accounts When copying is completed, press the Audit Clear KeyEnter your account number using the numeric keys Turn the power switch on Power onStream feeding mode Normal CopyingNormal Copying Adjust the copy densityEnsure that the one-sided to one-sided copying mode is Two-sided copies from one-sided originals Set the number of copies using the numeric keysPress the Start key Ensure that no original is left on the original tableSet the number of copies and press the Start key Two-sided copies from two-sided originalsSet the number of copies and press the Start key Original has been set in the document feeder tray One-sided copies from two-sided originalsEnsure that the desired paper tray is selected Close the document feeder coverCopying from the Original Table Copying from the original table Press the Original to Copy key Setting image rotation in duplex copyingSelect the desired parameter using the numeric keys Automatic REDUCTION/ENLARGEMENT/ZOOMManual REDUCTION/ENLARGEMENT/ZOOMRatio, then press To increase the ratioUnfold the bypass tray Bypass Feed special paperBypass Feed special paper Group mode Sort modeSORT/GROUP Offset stackSet the originals face up in the document feeder tray Copying in the sort modeSORT/GROUP Interrupting a Copy RUN Automatic Exposure Adjustment To enter the toner save mode, press the light key Toner Save ModePress the copy ratio display key XY ZoomXY Zoom Use the Preset Ratio selector , keys and zoomReverse Place the originals on the original table with the center Dual page CopyPress the Dual page Copy key 2 x 11 is performed, the image cannot be rotated Rotation Copying1 or 4 Press the 2 in 1 / 4 in 1 key to complete the selection Enter the desired pattern number using a numeric keyEnsure that the desired copy paper size is selected Press the Erase key to select the desired erase modeErase Erase Margin Shift Until the Margin Shift indicator will blinkPlace the original in the document feeder tray or on To confirm or set the location of the margin, pressPush the toner cartridge lock release lever and pull Toner Cartridge ReplacementToner cartridge life Toner Cartridge ReplacementThan 5 seconds Press the light keyFirst confirm the misfeed location Misfeed in the RspfMisfeed in the bypass tray Misfeed RemovalMisfeed in the copier If the misfed original cannot be removed in steps 1Push gently on both sides of the front cover to open Cover Removing itArrow Turn the roller rotating knob in the directionClose the side cover by pressing the handle on Cover Misfeed in the upper paper trayPull out the lower paper tray and remove the misfed paper Misfeed in the lower paper trayClose the paper tray Close the lower side cover If the misfed paper is not seen in , gently liftDeveloper Required Maintenance RequiredProgram Program name Description User ProgramsList of user programs Enter a program number using the numeric keys Setting the user programsUser Programs Program name Program NoTo continue with other user programs, press the key Enter a 3-digit account number using the numeric keys Settings for auditing accountsSelect the desired setting using the numeric keys Use the copy ratio display key to select the account Number to be changedPress and hold down the 0 key Use the copy ratio display key to select the account NumberProgram No Resetting account Auto power shut-off mode Power Save ModesPreheat mode Setting the power save modes Power Save ModesCopying from the preheat mode Copying from the auto power shut-off modeBypass tray with a soft, clean cloth dampened with User MaintenanceOriginal table and document feeder cover Bypass tray paper feed rollerTransfer charger cleaning User MaintenanceCharger cleaner out by holding the tab Gently lift and pull out the upper paper tray and takeCopier TROUBLE? Problem SolutionCOPY/FAX key ProblemCopier TROUBLE? Example Self-diagnostic functionTypes and sizes of copy paper SuppliesGenuine supplies statement SuppliesProper storage Store the supplies in a location that isRspf SpecificationsReversing Single Pass Feeder SpecificationsOptional Equipment System Configuration Loading copy paper Part NamesMisfeed removal AR-DE5 SpecificationsIndex Index Emergency and First Aid Procedures Material Safety Data SheetProduct Routes of EntrySpecial Fire Fighting Procedure Ignition TemperatureSpecific Gravity Vapor Pressure Vapor DensityProportion IngredientsHealth Hazards Medical Conditions Generally Aggravated by ExposureAppearance Fine powder Color Black Odor Odorless Evaporation Rate Not applicable ViscosityMemo For users in the USA Sharp Corporation