Sharp AR-207 Power Save Modes, Setting the power save modes, Copying from the preheat mode

Page 61

POWER SAVE MODES

Setting the power save modes

The time that elapses before the copier enters a power save mode after any operation is made can be set manually. This time is set with user program No. 2 for the preheat mode and user program No. 3 for the auto power shut-off mode. For these settings, see page 52.

●The copier will enter the preheat mode first and then the auto power shut- off mode after a preset time has elapsed when no copier operation has been made.

●If conflicting settings are made with user programs No. 3 and No.5, the last program set will have priority.

Copying from the preheat mode

Make desired copier selections and press the START key using the normal copying procedure.

●When any key input is made or any other copier operation is made, the POWER SAVE indicator will start to blink.

●When the START key is pressed, the START key indicator will go out and copying will start within 10 seconds. The POWER SAVE indicator will go out when copying starts.

Copying from the auto power shut-off mode

	●	Only available when an optional printer expansion kit or facsimile
		expansion kit is installed.
1	Press the START key.
1	●	The copier will exit the auto power shut-off mode and the POWER

SAVE indicator will start to blink.

Make desired copier selections and press the START

2 key using the normal copying procedure.

●It will take approximately 35 seconds for the copier to start copying. However, you can make desired settings and press the START key during warm-up. Copying will start after warm-up is finished.

GENERAL INFORMATION Power save modes

59

Image 61

Contents AR-207 Safety Precautions Contents Conventions used in this manual IntroductionMain Features Part Names and Functions Part Names and Functions Zoom indicator p.24 Interrupt key and indicator pPaper Size indicators Alarm indicatorsPreset Ratio selector keys and indicators Start key and indicatorOriginal Size Enter key and indicators Auto Paper Select indicatorDo not install your copier in areas that are Copier InstallationAlso make certain the outlet is properly grounded Do not touch the photoconductive drum green portion Gently lift and pull out the paper tray until it stops Loading Copy PaperPush the paper tray firmly back into the copier Loading Copy Paper Press the Start key and then the Paper Size Enter 11 key Enter your account number using the numeric keys When copying is completed, press the Audit Clear KeyAuditing Accounts Turn the power switch on Power onStream feeding mode Normal CopyingEnsure that the one-sided to one-sided copying mode is Adjust the copy densityNormal Copying Two-sided copies from one-sided originals Set the number of copies using the numeric keysPress the Start key Ensure that no original is left on the original tableSet the number of copies and press the Start key Two-sided copies from two-sided originalsSet the number of copies and press the Start key Original has been set in the document feeder tray One-sided copies from two-sided originalsEnsure that the desired paper tray is selected Close the document feeder coverCopying from the Original Table Copying from the original table Select the desired parameter using the numeric keys Setting image rotation in duplex copyingPress the Original to Copy key Automatic REDUCTION/ENLARGEMENT/ZOOMManual REDUCTION/ENLARGEMENT/ZOOMRatio, then press To increase the ratioUnfold the bypass tray Bypass Feed special paperBypass Feed special paper Group mode Sort modeSORT/GROUP Offset stackSORT/GROUP Copying in the sort modeSet the originals face up in the document feeder tray Interrupting a Copy RUN Automatic Exposure Adjustment To enter the toner save mode, press the light key Toner Save ModePress the copy ratio display key XY ZoomXY Zoom Use the Preset Ratio selector , keys and zoomReverse Press the Dual page Copy key Dual page CopyPlace the originals on the original table with the center 2 x 11 is performed, the image cannot be rotated Rotation Copying1 or 4 Press the 2 in 1 / 4 in 1 key to complete the selection Enter the desired pattern number using a numeric keyErase Press the Erase key to select the desired erase modeEnsure that the desired copy paper size is selected Erase Margin Shift Until the Margin Shift indicator will blinkPlace the original in the document feeder tray or on To confirm or set the location of the margin, pressPush the toner cartridge lock release lever and pull Toner Cartridge ReplacementToner cartridge life Toner Cartridge ReplacementThan 5 seconds Press the light keyFirst confirm the misfeed location Misfeed in the RspfMisfeed in the bypass tray Misfeed RemovalMisfeed in the copier If the misfed original cannot be removed in steps 1Push gently on both sides of the front cover to open Cover Removing itArrow Turn the roller rotating knob in the directionClose the side cover by pressing the handle on Cover Misfeed in the upper paper trayPull out the lower paper tray and remove the misfed paper Misfeed in the lower paper trayClose the paper tray Close the lower side cover If the misfed paper is not seen in , gently liftDeveloper Required Maintenance RequiredList of user programs User ProgramsProgram Program name Description Enter a program number using the numeric keys Setting the user programsUser Programs Program name Program NoTo continue with other user programs, press the key Select the desired setting using the numeric keys Settings for auditing accountsEnter a 3-digit account number using the numeric keys Use the copy ratio display key to select the account Number to be changedPress and hold down the 0 key Use the copy ratio display key to select the account NumberProgram No Resetting account Preheat mode Power Save ModesAuto power shut-off mode Setting the power save modes Power Save ModesCopying from the preheat mode Copying from the auto power shut-off modeBypass tray with a soft, clean cloth dampened with User MaintenanceOriginal table and document feeder cover Bypass tray paper feed rollerTransfer charger cleaning User MaintenanceCharger cleaner out by holding the tab Gently lift and pull out the upper paper tray and takeCopier TROUBLE? Problem SolutionCopier TROUBLE? ProblemCOPY/FAX key Example Self-diagnostic functionTypes and sizes of copy paper SuppliesGenuine supplies statement SuppliesProper storage Store the supplies in a location that isRspf SpecificationsReversing Single Pass Feeder SpecificationsOptional Equipment System Configuration Loading copy paper Part NamesMisfeed removal AR-DE5 SpecificationsIndex Index Emergency and First Aid Procedures Material Safety Data SheetProduct Routes of EntrySpecial Fire Fighting Procedure Ignition TemperatureSpecific Gravity Vapor Pressure Vapor DensityProportion IngredientsHealth Hazards Medical Conditions Generally Aggravated by ExposureAppearance Fine powder Color Black Odor Odorless Evaporation Rate Not applicable ViscosityMemo For users in the USA Sharp Corporation